WMC225 HYDRAcap60 UF module

Summary

Product identification

The WMC225 HYDRAcap series are hollow fiber ultrafiltration modules designed for water and wastewater applications. These modules excel in removing turbidity, suspended solids, and virus and bacteria, offering outstanding pH and chlorine resistance.

• Available Module Types & Product Codes:

  • WMC225 HYDRAcap60+ (Product-Code: SETUF0033)
  • WMC225 HYDRAcap60 (Product-Code: SETUF0032)
  • WMC225 HYDRAcap40 (Product-Code: SETUF0030)

• Membrane Characteristics:

  • Membrane material: Modified PES
  • Membrane fiber inner diameter: 0.8 mm (0.031”)
  • Pore size: 0.02 μm
  • Molecular Weight Cut Off (MWCO): 150 kDa (Note: MWCO is an estimation as it depends on size, shape, charge and polarity of the compound being tested, as well as test conditions. Measured with dextran.)
  • Filtration mode: Inside-Out; Vertical
  • Operation mode: Dead-end or cross-flow

Operating limits

• Max. system pressure: 3 bar (44 psi)
• Max. filtration transmembrane pressure: 1.5 bar (22 psi)
• Max. backwash pressure: 3 bar (44 psi)
• Max. active chlorine concentration: 500 ppm @ pH>10
• Max. cumulative active chlorine exposure: 250,000 ppm-hours @ pH>10
• Max. Temperature during operation & cleaning: 40°C (104°F)
• pH range during operation: 2-12
• pH range during cleaning: 1-13
• Typical flux: 50 – 100 l/m²/h (30 – 60 gfd)
• Backwash flux: 100 – 250 l/m²/h (60 - 150 gfd)

Feed water

• Max. particle size: 200 μm
• Max. TSS: 200 ppm
• Max. turbidity: 100 NTU

Mechanical / hydraulic

• Materials of Construction:

  • Housing: PVC-U
  • Internals:
    • WMC225 HYDRAcap60+, WMC225 HYDRAcap60: MBS, PP, Noryl
    • WMC225 HYDRAcap40: ABS, PP, PVC-U
  • Potting: Epoxy resin

• Module Specifications:

  • Membrane Surface Area:
    • WMC225 HYDRAcap60+: 56 m² (605 ft²)
    • WMC225 HYDRAcap60: 46 m² (500 ft²)
    • WMC225 HYDRAcap40: 30 m² (320 ft²)
  • Dimensions (Length):
    • L2.0: 1600 mm (63”) for HYDRAcap60+, HYDRAcap60; 1092 mm (43”) for HYDRAcap40
    • L2.1: 1680 mm (66.13”) for HYDRAcap60+, HYDRAcap60; 1172 mm (46.13”) for HYDRAcap40
    • L2.2: 1710 mm (67.32”) for HYDRAcap60+, HYDRAcap60; 1202 mm (47.32”) for HYDRAcap40
  • Dimensions (Diameter):
    • D2.0: 60.3 mm (2.37”) for all types
    • D2.1: 60.3 mm (2.37”) for all types

• Weight Information:

  • Empty weight Module including assembly components:
    • WMC225 HYDRAcap60+: 36.5 kg (80 lbs)
    • WMC225 HYDRAcap60: 34 kg (75 lbs)
    • WMC225 HYDRAcap40: 25 kg (55 lbs)
  • Filled module with assembly components:
    • WMC225 HYDRAcap60+: 87 kg (191 lbs)
    • WMC225 HYDRAcap60: 84 kg (185 lbs)
    • WMC225 HYDRAcap40: 57 kg (126 lbs)

• Shipping Information:

  • Shipping weight per module:
    • WMC225 HYDRAcap60+: 43.5 kg (96 lbs)
    • WMC225 HYDRAcap60: 41 kg (90 lbs)
    • WMC225 HYDRAcap40: 29 kg (64 lbs)
  • Shipping weight per crate (12 modules):
    • WMC225 HYDRAcap60+: 505 kg (1113 lbs)
    • WMC225 HYDRAcap60: 475 kg (1047 lbs)
    • WMC225 HYDRAcap40: 360 kg (794 lbs)
  • Crate dimensions:
    • WMC225 HYDRAcap40: 100 x 125 x 173 cm (40 x 50 x 68 in) (L x W x H)
    • WMC225 HYDRAcap60/60+: 100 x 125 x 191 cm (40 x 50 x 75 in) (L x W x H)

• Assembly Components:

  • WMC225 HYDRAcap Module
  • Product end adapter
  • O-ring #2-221 E70-150
  • Plug Dead End
  • O-ring #2-228 E70-150
  • End cap Molded Ported
  • End Cap Molded Nonported
  • Plastic Clamp 4 Molded Endcap
  • Washer D125-1A-M10-GALV
  • Spring Washer D127B-M10-GALV
  • Hex Bolt D931-M10x65-8.8zp
  • Hex Nut D934-M10-Gr.08 zp
  • O-ring #2-373 E70-150

• Storage Information:

  • Max. storage duration: 1 year from shipping date in original packaging.
  • Storage conditions: Dry place, protected from sunlight or any heat source, at temperatures between 1 and 40°C (33 and 104°F).
  • Ex-factory storage solution: 84wt% water, 15wt% glycerin and 1wt% sodium metabisulfite.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet