Datasheet summary
WMC225 HYDRAcap60 UF module
Engineering summary from PDF text extraction for WMC225 HYDRAcap60 UF module. Verify every value with the OEM datasheet.
Summary
Product identification
The WMC225 HYDRAcap series consists of hollow fiber ultrafiltration modules designed for water treatment, as well as industrial and municipal wastewater reuse. These modules are effective in removing turbidity, suspended solids, viruses, and bacteria, and offer excellent pH and chlorine resistance.
Membrane characteristics
- Membrane material: Modified PES
- Membrane fiber inner diameter: 0.8 mm (0.031”)
- Pore size: 0.02 μm
- Molecular Weight Cut Off (MWCO): 150 kDa (Note: MWCO is an estimation, dependent on size, shape, charge, polarity of the compound, and test conditions. Measured with dextran.)
- Filtration mode: Inside-Out; Vertical
- Operation mode: Dead-end or cross-flow
Available Module types and Product-Codes
- WMC225 HYDRAcap60+: SETUF0033
- WMC225 HYDRAcap60: SETUF0032
- WMC225 HYDRAcap40: SETUF0030
Operating limits
- Max. system pressure: 3 bar (44 psi)
- Max. filtration transmembrane pressure: 1.5 bar (22 psi)
- Max. backwash pressure: 3 bar (44 psi)
- Max. active chlorine concentration: 500 ppm @ pH>10
- Max. cumulative active chlorine exposure: 250,000 ppm-hours @ pH>10
- Max. temperature during operation & cleaning: 40°C (104°F)
- pH range during operation: 2-12
- pH range during cleaning: 1-13
Feed water
- Max. particle size: 200 μm
- Max. TSS: 200 ppm
- Max. turbidity: 100 NTU
Mechanical / hydraulic
Flux rates
- Typical flux: 50 – 100 l/m²/h (30 – 60 gfd)
- Backwash flux: 100 – 250 l/m²/h (60 - 150 gfd)
Materials of Construction
| Component | WMC225 HYDRAcap60+ | WMC225 HYDRAcap60 | WMC225 HYDRAcap40 |
|---|---|---|---|
| Housing | PVC-U | PVC-U | PVC-U |
| Internals | MBS, PP, Noryl | MBS, PP, Noryl | ABS, PP, PVC-U |
| Potting | Epoxy resin | Epoxy resin | Epoxy resin |
Dimensions
| Parameter | WMC225 HYDRAcap60+ | WMC225 HYDRAcap60 | WMC225 HYDRAcap40 |
|---|---|---|---|
| Membrane Surface Area | 56 m² (605 ft²) | 46 m² (500 ft²) | 30 m² (320 ft²) |
| L2.0 | 1600 mm (63”) | 1600 mm (63”) | 1092 mm (43”) |
| L2.1 | 1680 mm (66.13”) | 1680 mm (66.13”) | 1172 mm (46.13”) |
| L2.2 | 1710 mm (67.32”) | 1710 mm (67.32”) | 1202 mm (47.32”) |
| D2.0 | 60.3 mm (2.37”) | 60.3 mm (2.37”) | 60.3 mm (2.37”) |
| D2.1 | 60.3 mm (2.37”) | 60.3 mm (2.37”) | 60.3 mm (2.37”) |
Weight
| Parameter | WMC225 HYDRAcap60+ | WMC225 HYDRAcap60 | WMC225 HYDRAcap40 |
|---|---|---|---|
| Empty weight Module including assembly components | 36.5 kg (80 lbs) | 34 kg (75 lbs) | 25 kg (55 lbs) |
| Filled module with assembly components | 87 kg (191 lbs) | 84 kg (185 lbs) | 57 kg (126 lbs) |
| Shipping weight per module | 43.5 kg (96 lbs) | 41 kg (90 lbs) | 29 kg (64 lbs) |
| Shipping weight per crate (12 modules) | 505 kg (1113 lbs) | 475 kg (1047 lbs) | 360 kg (794 lbs) |
Shipping Information
- Each module is individually packed in a vacuum sealed plastic bag.
- For small quantities, modules are shipped in separate cardboard boxes.
- For large shipments, modules are loaded in a wooden crate with a maximum of 12 modules per crate.
- Crate dimensions WMC225 HYDRAcap40: 100 x 125 x 173 cm; 40 x 50 x 68 in (L x W x H)
- Crate dimensions WMC225 HYDRAcap60/60+: 100 x 125 x 191 cm; 40 x 50 x 75 in (L x W x H)
- Weight stated is shipping weight including preservative solution.
Assembly Components
The following components are listed for module assembly:
- WMC225 HYDRAcap Module
- Product end adapter
- O-ring #2-221 E70-150
- Plug Dead End
- O-ring #2-228 E70-150
- End cap Molded Ported
- End Cap Molded Nonported
- Plastic Clamp 4 Molded Endcap
- Washer D125-1A-M10-GALV
- Spring Washer D127B-M10-GALV
- Hex Bolt D931-M10x65-8.8zp
- Hex Nut D934-M10-Gr.08 zp
- O-ring #2-373 E70-150
Storage Information
- New modules in original packaging can be stored for a maximum of 1 year from the shipping date.
- Storage conditions: dry place, protected from sunlight or any heat source.
- Storage temperature: between 1 and 40°C (33 and 104°F).
- Ex-factory storage solution: 84wt% water, 15wt% glycerin, and 1wt% sodium metabisulfite.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.