Datasheet summary
WMC225 HYDRAcap60 UF module
Engineering summary from PDF text extraction for WMC225 HYDRAcap60 UF module. Verify every value with the OEM datasheet.
Summary
Product identification
The WMC225 HYDRAcap series consists of hollow fiber ultrafiltration modules designed for water and wastewater applications, excelling in removing turbidity, suspended solids, viruses, and bacteria. These modules offer outstanding pH and chlorine resistance.
Available module types and their product codes:
- WMC225 HYDRAcap60+: SETUF0033
- WMC225 HYDRAcap60: SETUF0032
- WMC225 HYDRAcap40: SETUF0030
Membrane characteristics
- Membrane material: Modified PES
- Membrane fiber inner diameter: 0.8 mm (0.031”)
- Pore size: 0.02 μm
- Molecular Weight Cut Off (MWCO): 150 kDa (Note: MWCO is an estimation, measured with dextran.)
- Filtration mode: Inside-Out; Vertical
- Operation mode: Dead-end or cross-flow
- Typical flux: 50 – 100 l/m²/h (30 – 60 gfd)
- Backwash flux: 100 – 250 l/m²/h (60 - 150 gfd)
Operating limits
- Max. system pressure: 3 bar (44 psi)
- Max. filtration transmembrane pressure: 1.5 bar (22 psi)
- Max. backwash pressure: 3 bar (44 psi)
- Max. active chlorine concentration: 500 ppm @ pH>10
- Max. cumulative active chlorine exposure: 250,000 ppm-hours @ pH>10
- Max. particle size: 200 μm
- Max. TSS: 200 ppm
- Max. turbidity: 100 NTU
- Max. Temperature during operation & cleaning: 40°C (104°F)
- pH range during operation: 2-12
- pH range during cleaning: 1-13
Mechanical / hydraulic
Materials of Construction
| Component | WMC225 HYDRAcap60+ | WMC225 HYDRAcap60 | WMC225 HYDRAcap40 |
|---|---|---|---|
| Housing | PVC-U | PVC-U | PVC-U |
| Internals | MBS, PP, Noryl | MBS, PP, Noryl | ABS, PP, PVC-U |
| Potting | Epoxy resin | Epoxy resin | Epoxy resin |
Dimensions
| Parameter | WMC225 HYDRAcap60+ | WMC225 HYDRAcap60 | WMC225 HYDRAcap40 |
|---|---|---|---|
| Membrane Surface Area | 56 m² (605 ft²) | 46 m² (500 ft²) | 30 m² (320 ft²) |
| L2.0 | 1600 mm (63”) | 1600 mm (63”) | 1092 mm (43”) |
| L2.1 | 1680 mm (66.13”) | 1680 mm (66.13”) | 1172 mm (46.13”) |
| L2.2 | 1710 mm (67.32”) | 1710 mm (67.32”) | 1202 mm (47.32”) |
| D2.0 | 60.3 mm (2.37”) | 60.3 mm (2.37”) | 60.3 mm (2.37”) |
| D2.1 | 60.3 mm (2.37”) | 60.3 mm (2.37”) | 60.3 mm (2.37”) |
Weight Information
| Parameter | WMC225 HYDRAcap60+ | WMC225 HYDRAcap60 | WMC225 HYDRAcap40 |
|---|---|---|---|
| Empty weight Module including assembly components | 36.5 kg (80 lbs) | 34 kg (75 lbs) | 25 kg (55 lbs) |
| Filled module with assembly components | 87 kg (191 lbs) | 84 kg (185 lbs) | 57 kg (126 lbs) |
Shipping Information
- Each module is individually packed in a vacuum sealed plastic bag. For small quantities, modules are shipped in separate cardboard boxes.
- For large shipments, modules are loaded in a wooden crate with a maximum of 12 modules per crate.
- Weight stated is shipping weight including preservative solution.
| Parameter | WMC225 HYDRAcap60+ | WMC225 HYDRAcap60 | WMC225 HYDRAcap40 |
|---|---|---|---|
| Shipping weight per module | 43.5 kg (96 lbs) | 41 kg (90 lbs) | 29 kg (64 lbs) |
| Shipping weight per crate (12 modules) | 505 kg (1113 lbs) | 475 kg (1047 lbs) | 360 kg (794 lbs) |
- Crate dimensions WMC225 HYDRAcap40: 100 x 125 x 173 cm; 40 x 50 x 68 in (L x W x H)
- Crate dimensions WMC225 HYDRAcap60/60+: 100 x 125 x 191 cm; 40 x 50 x 75 in (L x W x H)
Assembly Components
The module assembly includes:
- WMC225 HYDRAcap Module
- Product end adapter
- O-ring #2-221 E70-150
- Plug Dead End
- O-ring #2-228 E70-150
- End cap Molded Ported
- End Cap Molded Nonported
- Plastic Clamp 4 Molded Endcap
- Washer D125-1A-M10-GALV
- Spring Washer D127B-M10-GALV
- Hex Bolt D931-M10x65-8.8zp
- Hex Nut D934-M10-Gr.08 zp
- O-ring #2-373 E70-150
See the official PDF for connection configuration diagrams and component numbering.
Storage Information
- New modules in original packaging can be stored for a maximum of 1 year from the shipping date.
- Storage conditions: dry place, protected from sunlight or any heat source, at temperatures between 1 and 40°C (33 and 104°F).
- Ex-factory storage solution: 84wt% water, 15wt% glycerin, and 1wt% sodium metabisulfite.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.