Back to categories

Brand and model index

Full brand list

Activated Carbon

Powdered and granular activated carbon (PAC/GAC) for adsorption of organics, odor, and trace contaminants.

Indexed coverage: China-based brands 0 · International brands 0 (reference 2) · Total 0

China-based brands

No China-based brand profile is available in this category yet.

International brands

International brands: 0reference 2

Each brand card links to a brand profile with model profiles and datasheet entries.

No detailed brand profiles are available yet; see the reference section below for discovery links.

Category selection guide and applications
Typical Activated Carbon product form
Activated Carbon Typical product form
Activated Carbon working principle and structure illustration
Activated Carbon Working principle / structure

Activated Carbon Selection path

  1. 1

    Define target contaminants, concentration peaks, and effluent limits

  2. 2

    Choose PAC, GAC, coal, coconut-shell, or modified carbon

  3. 3

    Check contact time, adsorption indices, pressure drop, and replacement route

Activated Carbon Application matrix

Dechlorination before membranes

Primary objective
Protect membranes from oxidants
Check first
Chlorine load, EBCT, biological risk

Organics and odor control

Primary objective
Adsorb dissolved contaminants
Check first
Target chemistry, breakthrough, TOC

Wastewater polishing

Primary objective
Reduce refractory organics
Check first
Competitive adsorption, pretreatment, disposal

Activated Carbon Product information checklist

Key parameters

  • Iodine, methylene-blue, or target adsorption capacity
  • Particle size, hardness, ash, and moisture
  • Empty-bed contact time and pressure drop

System interfaces

  • Contactor size, distribution, and backwash system
  • Upstream solids control and downstream biological risk
  • PAC dosing, GAC loading, or filtration interface

O&M and documents

  • Breakthrough monitoring and replacement/regeneration
  • Backwash, fines loss, and hygiene control
  • Product test report, SDS, and disposal requirements

Further reading

Activated Carbon technical guide

Activated Carbon for Water Treatment

Activated carbon is an adsorption medium used to remove dissolved organics, taste and odor compounds, and selected trace contaminants from water and process streams. In treatment projects, it is commonly specified as powder activated carbon (PAC) or granular activated carbon (GAC), depending on contact mode and operational strategy.

PAC and GAC Selection

PAC is typically dosed for flexible, short-response adsorption control, while GAC is used in fixed beds and cartridge systems for continuous polishing duties. Media choice should be aligned with contaminant profile, hydraulic loading, target effluent quality, and replacement or regeneration strategy.

Typical Application Scope

Activated carbon is widely used in municipal drinking-water polishing, food and beverage process-water improvement, industrial pollution-control loops, and odor-removal duty. For engineering design and procurement, verify media grade and operating assumptions against OEM datasheets before final selection.

International reference catalog

Explore additional product lines, selectors and manuals. These reference entrances are listed separately from indexed brands.

Index sync: Mar 21, 2026, 3:33 PM · 2 reference entrances · 5 PDF links

Open Lenntech category

Reference links from Lenntech public catalog for procurement research. Not affiliated; verify with OEM. Replace with AquaChain-verified assets when available.

JALogo pending

Jacobi Activated Carbon

Reference brand identity

Product page on Lenntech

Open the product page for available specifications.

Activated Carbon | Brands & Models | AquaChain Guide