Back to AWC
AWC logo

Datasheet summary

AWC-C-234

Engineering summary from PDF text extraction for AWC-C-234. Verify every value with the OEM datasheet.

Summary

Product identification

  • Product Name: AWC® C-234
  • Product Type: Reverse Osmosis Membrane Cleaning Compound

Advantages

  • Concentrated liquid formulation designed for use as a low pH cleaner of polyamide thin film composite membrane surfaces.
  • Removes inorganic carbonate, phosphate, and sulfate scalants as well as metal oxides.
  • Contains a synergistic blend of cleaners and scale removal agents for a thorough cleaning of the membrane.
  • Will remove certain inorganic precipitants that cannot be removed through the use of citric or hydrochloric acid.
  • May eliminate the need for repeat cleanings in cases of severe scaling.
  • Compatible with all Thin Film Composite R.O. membranes from all major membrane suppliers.
  • Certified by NSF to NSF/ANSI Standard 60.

Typical Properties

  • Appearance: Clear colorless to yellow liquid
  • Odor: Essentially no odor
  • Solubility in water: Complete
  • pH (as is) @ 25˚C: < 2
  • Specific Gravity: 1.15 ± 0.05

Chemical Feeding and Control

  • The cleaning solution should be prepared using potable water that is free of residual chlorine or other oxidizing agents.
  • Add 2 gallons of AWC C-234 to every 100 gallons of water (2% solution).
  • Adjust the pH in the range 2–3.
  • Recirculate the cleaning solution throughout the system, after redirecting the first 20% of the solution to drain.
  • Do not exceed pressures, temperatures, and flow rates recommended by the membrane manufacturer.
  • Cleaning efficacy can be further improved by heating the cleaning solution and alternately circulating the solution for 15 minutes and then soaking the membranes for 15 minutes. Repeat as necessary.
  • Monitor the pH range periodically throughout the cleaning. When pH increases above the desired range, it should be adjusted by adding more AWC C-234.

Safety & Handling

  • Store in cool, dry and well ventilated area.
  • Keep containers closed.
  • Wash contaminated clothes before re-use.
  • Wash thoroughly after handling.
  • For more information, see the Safety Data Sheet provided with this product.

Packaging

  • 5 gallon pails
  • 55 gallon non-returnable plastic drums
  • 275 gallon totes

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.