Datasheet summary
Belcor 593
Engineering summary from PDF text extraction for Belcor 593. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: Belcor® 593
- Description: All-Organic Closed Loop Corrosion Inhibitor for Mild Steel
- Type: Organic anodic corrosion inhibitor
Application
Belcor 593 is designed as a building block for environmentally acceptable closed loop treatment formulations for mild steel in industrial water systems. It can be used alone or in combination with Belcor 575.
Benefits
- Provides 12% better corrosion rates than nitrite.
- Offers 60% lower cost than molybdate.
- Effective in a wide range of make-up water conditions (hard and soft waters).
- Contains no nitrite, which can support bacteria.
- Does not contain costly molybdate.
- Non-toxic and exhibits good biodegradability.
Usage
Consult with a BWA Water Additives representative for optimal dosage recommendations.
Packaging / Weight
- Bag: 55 lb (25 kg)
- Consult sales representative for availability.
Physical Properties
- Appearance: White, free flowing granules
- Active ingredient content: Nominally 65%
- Density: 1.1 g/cm³
- pH (10% suspension): About 5
- Solubility in water:
- Very slightly soluble (<0.01%) at or below pH 7.0
- Completely soluble above pH 8.0
- Solubility in methanol: Only slightly soluble (600 mg/l at 25°C)
- pH limitations: Good hydrolytic stability in acid/alkaline media.
Disclaimer: Extraction may miss figures, footnotes, or revisions; contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.