Autotrol Performa 269 / 869 Logix

Summary

Product Identification

• Product Line: Autotrol Performa Control Valve
• Series: Logix Series
• Controller Types: 740 Time Clock, 742 Time Clock, 760 Demand, 762 Demand, 764 Demand

Timer Characteristics

740 Time Clock

• Electronic time clock (chronometric)
• 1- or 99-day regeneration setting (days interval) or days of the week
• High efficiency regeneration sequence
• 12 V operation
• Filter or conditioner setting in one control
• Operates 255, 263, 268 with one controller

760 Demand

• Electronic demand (volumetric)
• Calendar override
• 12 V operation
• 28-day variable reserve
• High efficiency regeneration sequence
• Automatic capacity calculations
• Operates 255, 263, 268 with one controller

764 Demand

• Same features as the 760, plus:
  • Multi-tank applications (twin alternating, multi-tank parallel)
  • Control lockout
  • Remote regeneration

742 Time Clock

• Same features as the 740 Time Clock, plus:
  • Fully programmable cycle times
  • Salt setting in 10-grams increments
  • Optional no-salt detector
  • Operates 255, 263, 268, 278 and Magnum IT with one controller

762 Demand

• Same features as the 760, plus:
  • Fully programmable cycle times
  • Salt setting in 10-grams increments
  • Optional no-salt detector
  • Operates 255, 263, 268, 278 and Magnum IT with one controller

Transformer Specifications

• Output Voltage: 12 VAC 150 mA
• Input Voltage Options: 230 VAC 50/60 Hz
• Plug Options: United Kingdom, Mainland Europe
• Requirement: All controllers require the use of a Pentair-supplied transformer.

Valve Specifications

• Valve Body Material: Glass-filled thermoplastic – NSF Listed material
• Rubber Components Material: Compounded for cold water – NSF Listed material
• Material Certification: WQA Gold Seal Certified to ORD 0902, NSF/ANSI 44, CE, ACS
• Weight (Valve with Control): 2.42 kg (5.34 lbs)
• Controller Operating Voltage: 12 VAC
• Input Supply Frequency: 50 or 60 Hz (Controller configuration dependent)
• Motor Input Voltage: 12 VAC
• Controller System Power Consumption: 3 W average

Operating Limits

• Recommended Operating Pressure: 1.38-8.27 bar (20-120 psi)
• Hydrostatic Test Pressure: 20.69 bar (300 psi)
• Water Temperature: 2-38°C (35-100°F)
• Ambient Temperature: 2-48.9°C (35-120°F)

Flow Rates (Valve Only)

• Service @ 1.03 bar (15 psi) drop: 5.7 m³/h (25.0 gpm)
• Backwash @ 1.72 bar (25 psi) drop: 4.5 m³/h (20.0 gpm)
• Service Kv: 5.6 (Cv = 6.50)
• Backwash Kv: 3.5 (Cv = 4.00)

Valve Connections

• Tank Thread: 2 1/2 inches – 8, male
• Inlet/Outlet Threads: 1 3/4 inch – 12 UNC-2A male
• Drain Line: 3/4 inch NPT, male
• Brine Line: 3/8 inch NPT, male
• Distributor Tube Diameter: 27 mm (1.050 inch)
• Distributor Tube Length: 13 ± 13 mm (1/2 ± 1/2 inch) above top of tank

Backwash Flow Control

See the official PDF for exact tabulated values.

• Backwash flow controls sized for 5.0 gpm/sq. ft.

Options

• Turbine for Demand Units: Internal Standard Autotrol 25 mm (1-inch) turbine
• Bypass Valve, Model 1265: Thermoplastic, 1-inch flow path
• Bypass Fitting Kits:
  • Copper, Sweat Tube Adapter (32, 25 or 19 mm)
  • CPVC, Solvent Weld Tube Adapter (25 or 19 mm)
  • Plastic NPT or BSPT Pipe Adapter (25 or 19 mm male)
  • Stainless steel NPT or BSPT Pipe Adapter (25 or 19 mm male)
• Brine Refill Controls: 0.14 gpm (0.53 Lpm) fixed; 0.33 gpm (1.25 Lpm) fixed; 0.74 gpm (2.8 Lpm) fixed; 1.3 gpm (4.92 Lpm) fixed

Injector Performance

• New injectors for high-efficiency regeneration sequence are standard with Logix Controllers.

• Actual injector performance is dependent on the resin used, tank geometry, elevated drain, etc. This injector data was taken using an empty tank (no resin).

  • Injector "F" (Peach) for 7-inch Tanks
  • Injector "G" (Tan) for 8-inch Tanks
  • Injector "H" (Light Purple) for 9-inch Tanks
  • Injector "J" (Light Blue) for 10-inch Tanks
  • Injector "K" (Pink) for 12-inch Tanks
  • Injector "L" (Orange) for 13-inch and 14-inch Tanks

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror