
Datasheet summary
Fleck 5800
Engineering summary from PDF text extraction for Fleck 5800. Verify every value with the OEM datasheet.
Summary
Product identification
- Product: Fleck 5800 Control Valve
- Product Line: Pentair Control Valves
- Document: Technical Sheet, June 2012 - Rev. A
Operating limits
- Pressure:
- Hydrostatic: 300 psi (20 bar)
- Working: 1.4-8.5 bar (20-125 psi)
- Temperature: 1-43°C (34-110°F)
Feed water
- Meter Accuracy: 0.25-15 gpm ± 5%
Product water
- Soft water refill: For better brine saturation and cleaner brine tank
Electrical
- Drive Motor: 12 V DC, 10,000 RPM
- Electrical Rating: 12 V DC
- Time of Day Backup: Up to 12 hours power loss
Mechanical / hydraulic
- Valve Material: Fiber-reinforced polymer
- Inlet/Outlet Sizes: 0.75, 1, or 1.25 inch
- Service Rates:
- Continuous: 21 gpm (4.8 m³/h) at 50 psi inlet / 1 bar ∆p
- Peak: 27 gpm (6.1 m³/h) at 50 psi inlet / 1.8 bar ∆p
- Backwash Flow Rate: 17 gpm (3.9 m³/h) at 50 psi inlet / 1.8 bar ∆p (25 psi ∆P stated in bullet points)
- Cv: 5.4 (Flow rate of valve alone in gpm at 0.07 bar pressure drop)
- Distributor Pilot: 1.05 inch O.D. (26.7 mm)
- Drain Line: ½ inch O.D.
- Brine Line: ⅜ inch
- Mounting Base: 2½ inches - 8 NPSM
- Height from Top of Tank: 9 inches (228 mm)
Features
- Seal and spacer cartridge for easy servicing
- Backlit LCD display
- Precision cycle positioning using optical sensor
- Timer Options:
- LXT:
- Easiest to program (2-4 parameters)
- Midsize, blue backlit LCD
- Preprogrammed for Time Clock or Meter valve
- Calculated minutes
- SXT:
- Increased flexibility, set cycle steps
- Large, blue backlit LCD
- Ability to change programming: Time Clock or Meter and filter or softener
- 0-199 minutes per cycle
- LXT:
- Regeneration Type:
- Upflow or countercurrent regeneration
- Down flow or co-current regeneration
- Backwashing filter
- Metered- or Time Clock-initiated regeneration
- Meter Capacity Range (gal.):
- LXT: Volume calculated
- SXT: 1-999,900
- Tank Size Compatibility:
- Water Softener: 6-16 inches Ø (limited by maximum injector size)
- Filter: 8-16 inches Ø (based on 10 gpm per sq. ft.)
Disclaimer: This extracted summary may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.