V250A Softener valve body

Summary

Product Identification

• Product Line: Siata Control Valves
• Model: V250
• Type: Water Purification Valve Body

Operating Limits

• Hydrostatic Pressure: 22 bar
• Working Pressure: 1.5 to 6 bar
• Working Temperature: 5° to 40°C
• Material: ABS + 17% glass fiber
• Color: Blue / black

Feed Water

• Flow Rate (Downflow Regeneration, continuous at ∆p = 1 bar): 21 m³/h
• Flow Rate (Downflow Regeneration, peak at ∆p = 1.9 bar): 28.9 m³/h
• Maximum Backwash Flow Rate (at ∆p = 1.9 bar): 12 m³/h
• Maximum Rapid Rinse Flow Rate (at ∆p = 1.9 bar): 15 m³/h
• Cv (valve alone, at 0.07 bar pressure drop): 24.4 GPM (This refers to flow rate of valve alone)

Applications

• Residential and commercial softening
• Demineralisation
• Dealkalisation
• Filtration systems

Mechanical / Hydraulic

• Inlet/Outlet Connection: 2”¼ - BSP male threaded
• Drain Line Connector: 1’’1/2 BSP female - 2’’ BSP male
• Mounting Base/Tank Connection: 4” top mount
• Versions Available: With or without by-pass
• Pilot Connections: Quick
• Upflow Regeneration: No
• Duplex Systems: Yes
• External DLFC: Yes (1” 1/4)

Threaded Fittings Options

• 494-A/05: dia. 50 mm to glue (PVC-PVC)
• 494-G/05: 2” BSP male (Brass-Brass)
• 494-H/05: 1 ½” BSP female (PVC-PVC)
• 494-P/05: 1 ½” BSP female (Brass-Brass)

Tank Size Application (Recommended)

• Water Softener: 14’’ - 30’’ (max 500 L of resin)
• Filter: 14’’ - 30’’ (according to filter media specs)
• Demineralisation: 14’’ - 30’’ (max 500 L of resin)

Regeneration Cycles

• Adjustable Cycles: Depending on controller fitted
• Typical Cycles (Softener & Demineralisation):
  1. Backwash (Up flow)
  2. Brine & slow rinse (Down flow)
  3. Rapid rinse (Down Flow)
• Typical Cycles (Filter):
  1. Backwash (Up Flow)
  2. Rapid rinse (Down Flow) Note: Depending on the controller type, brine draw and slow rinse time must be set to 0.

Electrical

• Compatibility: Compatible with most of the SIATA controller range.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror