Back to Evoqua Ultrapure Water Systems
Evoqua logo

Datasheet summary

Ultra Clear RO DI

Engineering summary from PDF text extraction for Ultra Clear RO DI. Verify every value with the OEM datasheet.

Summary

Product identification

The Ultra Clear® RO DI series delivers ultrapure water for laboratory requirements. These systems combine Reverse Osmosis (RO) with a Deionization (DI) module to produce water with very low conductivity. The DI modules are directional and require periodic replacement, typically every 3 months, depending on feed water quality and consumption.

Benefits include:

  • Simple change of modules due to quick-fit coupler
  • Service/maintenance report
  • High capacity of DI modules
  • Scope of supply includes consumables
  • Made in Germany

Typical Applications:

  • Feed for laboratory ultrapure water systems
  • General chemistry
  • Laboratory washing machines including final rinse
  • Feed for autoclaves and climate chambers
  • Buffer preparation
  • Photometry
  • Spectrophotometry
  • Media preparation

Available storage tanks: 30, 60, and 80 liter, with options up to 3,000 liter as needed.

Operating limits

ModelProduction rate (l/h)Power consumption (kW/h)
Ultra Clear RO DI 20200.2
Ultra Clear RO DI 30300.2

Feed water

  • Pressure: 2 – 6 bar
  • Conductivity: < 2000 µS/cm**
  • CO₂: < 15 mg/l**
  • Silt density index (SDI): < 12**
  • Free Chlorine: < 0.1 mg/l
  • Total iron: < 0.1 mg/l

** with a pre-filter

Product water

  • Permeate conductivity: < 0.1 µS/cm
  • Rejection rate (up to): 96 %
  • Rejection rate for bacteria: 99 %
  • Rejection rate for particles: 99 %

The system polishes RO permeate from a typical 8 µS/cm (originating from 400 µS/cm feed water with 98% rejection) to < 0.1 µS/cm.

Electrical

  • Power supply: 240/50 - 60 v/Hz*

* 115V upon request

Mechanical / hydraulic

ModelDimension (H x W x D) (mm)Shipping weight (kg)
Ultra Clear RO DI 20530 x 340 x 42033
Ultra Clear RO DI 30530 x 340 x 42034

Accessories & Consumables

Tanks and Kits

  • Tank 30 l
  • Tank 60 l without pump
  • Tank 60 l with pump
  • Tank 80 l with pump 8 l/min
  • Tank 80 l with pump 1.2 l/min
  • CO₂ + UV Kit for 30 l: 12 months*
  • CO₂ + UV Kit for 60 l: 12 months*
  • UV Kit 30, 60 l tank: 12 months*
  • UV Lamp 80 l tank: 12 months*
  • Degasing unit

Modules and Other Consumables

  • Pre-treatment module AMB: 3 – 6 months*
  • Deionization module VMD: 3 months*
  • RO module 20 l/h: 2 – 3 years*
  • RO module 15 l/h**: 2 – 3 years*
  • CO₂ Trap CT1, replacement (30, 60, 80 l tank): 12 months*
  • UV Kit 30, 60, 80 l tank: 12 months*

* Change intervals possibly shorter, depending on feed water and consumption. ** Amount of modules depends on system size.


Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror

Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.