Ultra Clear TP ED

Summary

Product identification

The Ultra Clear™ TP ED series is an ultrapure water system featuring an electronic dispenser for precise, volume-controlled dispensing at flows up to 2 l/min. It includes an intuitive software with a 7" multi-color touch display for operation, showing all important parameters and change intervals. Data transfer is supported via a printer and Modbus interface.

Key features include:

• Simple installation, factory-ready with initial modules, filters, and connection hoses.
• Easy access to modules for user replacement without a service technician.
• Components designed for long service life, monitored by software.
• A single, highly efficient UV lamp for TOC oxidation and monitoring.
• Integrated, user-guided disinfection mode to increase system service life.
• Expandability with optional accessories.

Models

The Ultra Clear TP ED series is available in several models categorized by their feed water requirements and purification stages:

Polisher Models (e.g., Ultra Clear TP ED UV TM Polisher, Ultra Clear TP ED UV UF TM Polisher)

• Designed for deionized water feed at conductivity < 20 µS/cm.
• Ultrapure water output capacity up to 2 l/min.
• Delivers water quality of 18.2 MΩ-cm (0.055 µS/cm).

TWF Models (e.g., Ultra Clear TP ED 10 TWF 30 UV TM TWF)

• Connects directly to the drinking water network (Tap Water Feed).
• Features a water-saving reverse osmosis stage with a recovery rate of > 30%.
• A subsequent ion exchange module (DI) provides water with < 2 µS/cm from the tank.

TWF EDI Models (e.g., Ultra Clear TP ED 20 TWF EDI 30 UV TM TWF EDI)

• Represents the highest expansion stage of the TWF series.
• Utilizes an IONPURE® EDI cell for residual deionization of RO permeate.
• Achieves a quality between 0.06 and 0.2 µS/cm when fed into the tank.
• Offers a compact, economical solution for producing two water qualities.

Typical Applications

• HPLC
• IC
• GC and GC/MS
• TOC analysis
• ICP and ICP/MS
• DNA sequencing
• RNase- and DNase-free
• DNA free
• PCR
• IVF
• 2D electrophoresis
• Critical cell and tissue culture
• Pyrogen sensitive applications

Feed water

For Polisher Models

• Pressure: 0.1 – 5 bar
• Conductivity: < 20 µS/cm
• CO₂: < 15 mg/l
• Silica: < 15 mg/l
• TOC: < 50 ppb
• Feed water quantity: 60 - 120 l/h
• Temperature: 5 – 35 °C
• SDI: < 3
• Free Chlorine: < 0.1 mg/l
• Iron: < 0.1 mg/l
• Manganese: < 0.05 mg/l
• pH value: 3 – 9

For TWF Models

• Pressure: 0.1 – 5 bar
• Conductivity: < 1400 µS/cm
• CO₂: < 15 mg/l
• Silica: < 15 mg/l
• TOC: — (Not specified)
• Feed water quantity: 25 - 30 l/h
• Temperature: 5 – 35 °C
• SDI: < 3
• Free Chlorine: < 0.1 mg/l
• Iron: < 0.1 mg/l
• Manganese: < 0.05 mg/l
• pH value: 3 – 9

For TWF EDI Models

• Pressure: 0.1 – 5 bar
• Conductivity: < 1400 µS/cm
• CO₂: < 10 mg/l
• Silica: < 10 mg/l
• TOC: — (Not specified)
• Feed water quantity: 50 - 70 l/h
• Temperature: 5 – 30 °C
• SDI: < 3
• Free Chlorine: < 0.1 mg/l
• Iron: < 0.1 mg/l
• Manganese: < 0.05 mg/l
• pH value: 3 – 9

Product water

Pure Water (Applicable to TWF and TWF EDI models)

• Flow rate:
  • TWF models: 10 l/h
  • TWF EDI models: 20 l/h
• Conductivity:
  • TWF models: < 2 µS/cm
  • TWF EDI models: < 0.2 µS/cm

Ultrapure Water (All models)

• Flow rate: up to 2 l/min
• Conductivity: 0.055 µS/cm
• Resistivity: 18.2 MΩ-cm
• TOC: < 3 ppb
• DNase, RNase, DNA: free
• Bacteria: < 0.1 CFU/ml
• Endotoxins: < 0.001 EU/ml (for UF systems)
• Particles > 0.2 µm: < 1 /ml

Electrical

• Voltage/Hertz: 100 – 240 V/50 – 60 Hz
• Power consumption: 225 W

Mechanical / hydraulic

• System Dimensions (W/H/D): 340 × 535 × 550 mm (all listed models)
• Tank Dimensions (W/H/D):
  • 30 l tank: 300 × 770 × 310 mm
  • 60 l tank: 560 × 770 × 310 mm
  • 80 l tank: 800 x 350 x 500 mm
• Total weight (kg): Varies by model (23, 30.5, 31.5, 33, 34, 47 kg as specified for different models).

Optional Accessories

• AQUASTOP 230 VAC/50 – 60 Hz Leakage detector
• Solenoid valve 220 V/50 Hz; NC; DN10; 3/4" i/a
• Wall bracket for 30 l tank
• Wall bracket for 60 l tank
• CO₂ Degasing system
• Flushing filter/backflow preventor combination 3/4"
• 0.2 µm Sterile filter, with Endotoxin retention (pack of 3 filters)
• Disinfection kit (3 syringes)

Consumables

• Pre-treatment module AMB: TWF models, 6 – 12 months
• Pre-treatment module DTO: Polisher models, 6 – 12 months
• Conditioning module: TWF models, change frequency varies*
• Polishing module MFIIID: All models, 6 – 12 months
• 0.2 µm Sterile filter (pack of 3 filters): All models, max. 6 months
• Replacement UV for TOC oxidation chamber: All models, 1 year (max. 8000 hrs)
• Replacement UV for storage tank: TWF and TWF EDI models, 1 year (max. 8000 hrs)
• Replacement CO₂ cartridge: TWF models, 1 year
• RO module: TWF models (1x), TWF EDI models (2x), 2 – 3 years
• Ultrafiltration module (for UF systems only): 18 – 36 months
• IONPURE® EDI cell: TWF EDI models, 5 years

*Change frequency depends on incoming water quality and amount of water withdrawn. All change intervals are average rates and may vary.

---

Disclaimer: This summary is based on the provided text extract and may not include all figures, footnotes, or the latest revisions. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror