Datasheet summary
BEL i-lEC membranes with BEL Vessels
Engineering summary from PDF text extraction for BEL i-lEC membranes with BEL Vessels. Verify every value with the OEM datasheet.
Summary
Product identification
The iLEC connection system utilizes DOW FILMTEC Membranes.
Mechanical / hydraulic
The iLEC connection system is unique due to its length of 40.5 inches, whereas other manufacturers typically provide a 40-inch dimension. This additional 0.5 inches per membrane accumulates when elements are interconnected.
This design necessitates two types of End Caps for pressure vessels:
- Standard End Cap: Attached to the rejecting side of the pressure vessel. This end cap provides a Thrust Ring to distribute the forces from membranes during operation.
- Short End Cap: Must be located on the pressure vessel’s feed side.
Incorrect placement of these End Caps can cause damage to the membranes during operation.
For BEL Solution, BEL Standard Adapters are strictly used.
To simplify membrane loading, especially as membranes are installed by turning and operators' hands may be soaked in glycerin (lubricant), the use of a grip wrench is recommended. The grip wrench must be sized appropriately to tighten 8-inch membranes.
Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions found in the official OEM PDF datasheet. For contractual data, always refer to the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.