eq-codeline-pressure-vessels-codeline-80e100

Summary

Product identification

The CodeLine Model 80E100 Fiberglass RO Pressure Vessel is designed for continuous, long-term use as housing for reverse osmosis membrane elements to desalt typical sea waters. It accommodates any make of eight-inch nominal diameter spiral-wound elements.

The vessel is designed in accordance with the engineering standards of the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers (ASME Code).

Operating limits

• Design Pressure: 1000 PSI at 120°F (6.89 MPa @ 49°C)
• Minimum Operating Temperature: 20°F (-7°C)
• Factory Test Pressure:
  • CE: 1500 PSI (10.3 MPa)
  • ASME: 1100 PSI (7.58 MPa)
• Burst Pressure: 6000 PSI (41.4 MPa)
• Permeate Pressure: Do not exceed 125 psi at 120°F (0.86 MPa @ 49°C)
• pH Levels: Do not operate below 3 or above 10

Mechanical / hydraulic

Materials of Construction

The following materials are listed for the vessel components:

• Shell: Filament Wound Epoxy/Glass composites - SS Head locking grooves integrally wound in place.
• Bearing Plate: 6061-T6 Aluminium Alloy-Hard Anodized as per ASME SB-221/SB-209.
• Sealing Plate: Engineering Thermoplastic.
• Feed/Conc Port: UNS S32750*
• Port Retainer Set: CF8M Cast SS, Two-piece set.
• Permeate Port: Engineering Thermoplastic.
• Port Nut: Engineering Thermoplastic.
• Head Seal: Ethylene Propylene - O Ring.(442)
• Port Seal: Ethylene Propylene - O Ring.(225)
• Retaining Ring: 316 Stainless Steel as per ASME SA 479
• Saddle: Engineering Thermoplastic. (*Furnished with length codes 4, 5, 6, 7 & 8)
• Strap Assy.: 304 Stainless Steel - PVC cushion (*Furnished with length codes 4, 5, 6, 7 & 8)
• Strap screw: 5/16-18 UNC, 18-8 Stainless Steel.
• Adapter: Engineering Thermoplastic.
• PWT Seal: Ethylene Propylene - O - Ring
• Adapter seal: Ethylene Propylene - O - Ring (124)
• Thrust Ring: Engineering Thermoplastic.

Dimensional considerations

• Shell Expansion: Under pressure, the fiberglass shell can experience:
  • ∆DIA = 0.015 in. (0.4mm)
  • ∆L = 0.2 in. (5mm) for a length code –8 vessel.
• Piping Support: The vessel should not be used to support other components. Maximum weight of branch piping allowed:
  • Feed/concentrate: 16 lbs (7.3 kg)
  • Permeate: 8 lbs (3.6 kg)

Ordering information

When ordering, provide the membrane brand and model number. Optional materials or features not listed require factory consultation.

Vessel Length Codes

MODEL 80E100 is available with the following length codes:

• -1
• -2
• -3
• -4
• -5
• -6
• -7
• -8

Certifications

Available certifications include:

• ASME Stamped and National Board Registered (consult factory for pricing)
• CE Marked
• Standard, Certified by Pentair water.

Exterior Finish

• Standard: White high-gloss polyurethane coating.
• Option: Optional colors are available for 50 or more vessels per order (consult factory for pricing).

Material Options

• Standard: All materials as per drawing 99108.
• Customer specified materials: (consult the factory, as these options will affect pricing and vessel lead-time).

---

Disclaimer: This summary is based on the provided text extract. The original OEM PDF may contain additional figures, footnotes, or more recent revisions. Contractual data must match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet