80H100

Summary

Product identification

The CodeLine 80H100 Fiberglass RO Pressure Vessel is designed for continuous, long-term use as housing for reverse osmosis membrane elements. It accommodates any make of 8-inch nominal diameter spiral-wound element for desalting typical brackish waters.

The vessel is designed in accordance with the engineering standards of the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers (ASME) Code.

Operating limits

• Design Pressure: 1000 PSIG at 150°F (6.9 MPa at 66°C)
• Minimum Operating Temperature: 20°F (-7°C)
• Factory Test Pressure:
  • CE: 1500 PSIG (10.34 MPa)
  • ASME: 1100 PSIG (7.58 MPa)
• Qualification Pressure: 6000 PSI (41.37 MPa)
• Permeate Pressure Limit: 125 psi at 150°F (0.86 MPa at 66°C)
• pH Range: 3-10

Mechanical / hydraulic

• Shell Material: Filament Wound Epoxy/Glass composite with integrally wound head locking grooves.
• F/C Port Material: CD3MWCuN (standard)
• F/C Port Seal Material: Ethylene Propylene
• Bearing Plate Material: 6061-T6 Aluminium alloy - Hard anodized (standard)
• Sealing Plate Material: Engineering Thermoplastic
• Permeate Port Material: Engineering Thermoplastic (standard)
• Port Nut Material: Engineering Thermoplastic
• Head Seal Material: Ethylene Propylene - O - Ring
• Perm Port Seal Material: Ethylene Propylene - O - Ring
• Quick Release Spiral Ring Material: 316 Stainless Steel
• Saddle Material: Engineering Thermoplastic
• Strap Assembly Material: 304 Stainless Steel-PVC Cushion (standard)
• Strap Screw Material: 5/16-18 UNC, 18-8 Stainless Steel
• Adapter Material: Engineering Thermoplastic
• Adapter Seal Material: Ethylene Propylene - O - Ring
• PWT Seal Material: Ethylene Propylene - O - Ring
• Thrust Cone Material: Engineering Thermoplastic

Shell Expansion:

• ∆DIA = 0.015 in. (0.4mm)
• ∆L = 0.2 in. (6mm) for a length code –8 vessel

Installation Recommendations:

• Mount the shell on horizontal members at span "S" using compliant vessel supports furnished.
• Align and center side ports with the manifold header.
• Use flexible type grooved-end pipe couplings (e.g., Victaulic® Style 77 or equivalent) at side ports, allowing a 0.125 inch gap.
• Provide flexibility and support for piping manifolds to allow vessel growth under pressure.
• Provide overpressure protection for the vessel set at not more than 105% of design pressure.

Dimensions and Weight: The provided table for vessel dimensions (Length L, P, S) and approximate weight for different configurations is fragmented and unreadable in the extracted text. Please See the official PDF for exact tabulated values.

Ordering / Customization Options

• Vessel Length Code: Available in codes -1 through -8.
• Membrane Brand and Model: Supply adapters for specified membrane brand and model.
• Certification:
  • ASME Stamped and National Board Registered.
  • CE Marked Standard.
  • Certified by Pentair Water.
  • In compliance with ASME Sec X but not Code Stamped.
  • Hydro testing at 1.1 times the design pressure.
  • Hydro testing at 1.5 times the design pressure.
• Permeate Port Selection:
  • Size: 1”, 1.25”, 1.5” (Standard offering is 1.0”)
  • Type of Connection: FNPT, MNPT, BSPTM, BSPTF, IPS GROOVED (Note: 1.25” & 1.5” BSPTF, 1.25” & 1.5” FNPT connections cannot be offered). Standard is FNPT.
  • Material of Construction: PET/Noryl (standard), SS316L, Zeron 100.
• Strap Assembly:
  • Standard SS304.
  • Optional SS316.
  • Optional SS316L.
• Feed/Concentrate Port Selection:
  • Material of Construction:
    • Standard: Super Duplex SS (CD3MWCuN).
    • Optional: CE3MN.
  • Configuration:
    • Standard: CD3MWCuN 1G5G.
    • Optional: Multi port (refer to specific sheet for selection). Ports not available in 90º configurations.
• Bearing Plate Material:
  • Standard: 6061 T6 Aluminium.
  • Optional: Stainless Steel 316L.
• Adapter Kits: Upstream and Downstream. Port size codes D (1½” GROOVED END), E (2” GROOVED END), F (2½” GROOVED END), G (3” GROOVED END).

Disclaimer

This summary is based on extracted text and may miss figures, footnotes, or the full context of the original document. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet