80H120

Summary

Product identification

The CodeLine 80H120 is a Fiberglass RO Pressure Vessel designed for continuous, long-term use as housing for reverse osmosis membrane elements. It is intended to desalt typical brackish waters. It accommodates any make of eight-inch nominal diameter spiral-wound elements, with appropriate interfacing hardware furnished.

This model is designed in accordance with the engineering standards of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code. ASME Code stamping is available at an additional cost.

Operating limits

• Design Pressure: 1200 PSIG at 150°F (8.27 MPa at 66°C)
• Minimum Operating Temperature: 20°F (-7°C)
• Factory Test Pressure:
  • CE: 1800 PSIG (12.41 MPa)
  • ASME: 1320 PSIG (9.10 MPa)
• Qualification Pressure: 7200 PSI (49.64 MPa)
• Permeate Pressure Limit: Do not operate with permeate pressure exceeding 125 psi at 150°F (0.86 MPa at 66°C).
• pH Range: Do not operate outside the pH range of 3-10.

Mechanical / Hydraulic

Dimensions and Weights

The following table provides dimensions and approximate weights for various vessel length codes:

Note: The original document lists 'P' and 'S' values in inches followed by their metric equivalents in millimeters, but for the weight, it lists 'LB' followed by 'KG' in parentheses. There appears to be a transcription error in the original document for the first weight entry (88 LB (88 KG)).

Materials of Construction

• Shell: Filament Wound Epoxy/Glass composite, with head locking grooves integrally wound.
• F/C Port Seal, Head Seal, Perm Port Seal, Adapter seal, PWT Seal: Ethylene Propylene.
• Bearing Plate: Standard 6061-T6 Aluminium alloy (hard anodized). Optional Stainless Steel 316L is available.
• Sealing Plate, Permeate Port, Port Nut, Saddle, Adapter, Thrust Cone: Engineering Thermoplastic. Optional materials (SS316L, Zeron 100) are available for Permeate Ports.
• Quick Release Spiral Ring: 316 Stainless Steel.
• Strap Assembly: Standard 304 Stainless Steel-PVC Cushion. Optional SS316 or SS316L are available.
• Strap Screw: 5/16-18 UNC, 18-8 Stainless Steel.
• F/C Port: Standard CD 3MWCuN Super Duplex SS. Optional CE3MN is available.

Shell Expansion

The high-performance Filament wound FRP shell is designed to expand under pressure. Expected expansion for a length code –8 vessel is approximately:

• Diameter (∆DIA): 0.015 in. (0.4mm)
• Length (∆L): 0.2 in. (6mm)

Ordering Information

When ordering, customers should specify the following options:

• Vessel Length Code: Select from -1 to -8.
• Membrane Brand and Model: To ensure correct adapter provision.
• Certification Required: Options include ASME Stamped and National Board Registered, CE Marked Standard, Certified by Pentair Water, in compliance with ASME Sec X (but not Code Stamped), or Hydro testing at 1.1 or 1.5 times the design pressure.
• Permeate Port Selection:
  • Size: 1", 1.25", 1.5".
  • Type of Connection: FNPT, MNPT, BSPTM, BSPTF, IPS GROOVED.
  • Material of Construction: PET/Noryl, SS316L, Zeron 100.
  • Note: The standard offering is 1.0” FNPT in PET/Noryl. Certain 1.25” & 1.5” connections (BSPTF, FNPT) are not available.
• Strap Assembly: Standard SS304, Optional SS316 or SS316L.
• Feed/Concentrate Port Selection:
  • Material of Construction: Standard Super Duplex SS (CD3MWCuN), Optional CE3MN.
  • Configuration: Standard CD3MWCuN 1G5G or Optional Multi-port (refer to specific sheet for multi-port selection; 90º configurations are not available).
• Bearing Plate Material: Standard 6061 T6 Aluminium, Optional Stainless Steel 316L.
• Adapter Kits: Upstream and Downstream.
• Port Size Code for Feed/Concentrate:
  • D: 1½” GROOVED END
  • E: 2” GROOVED END
  • F: 2½” GROOVED END
  • G: 3” GROOVED END

Permeate Port Retainer Ring & Port Nut Part Numbers

• 1.0" / 1.25" Standard Port nut: 45066
• 1.5" Port Retainer Ring: 45247

Disclaimer

This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original PDF datasheet. For contractual purposes, data must conform to the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet