80S60

Summary

Product Identification

The CodeLine 80S60 Fiberglass RO Pressure Vessel is designed for continuous, long-term use as housing for reverse osmosis membrane elements. It accommodates any make of eight-inch nominal diameter spiral-wound element. The vessel is designed in accordance with the engineering standards of the American Society of Mechanical Engineers (ASME) Code.

Operating Limits

• Design Pressure: 600 PSIG at 190°F (4.1 MPa at 88°C)
• Minimum Operating Temperature: 20°F (-7°C)
• Factory Test Pressure:
  • CE: 900 PSIG (6.20 MPa)
  • ASME: 660 PSIG (4.55 MPa)
• Qualification Pressure: 3600 PSI (24.8 MPa)
• Maximum Permeate Pressure: 125 psi at 190°F (0.86 MPa at 88°C)
• pH Range: 3-10

Intended Use

The vessel is intended to desalt typical brackish waters at pressures up to 600 psi.

Mechanical / Hydraulic

Construction Materials:

• Shell: Filament Wound Epoxy/Glass composite with integrally wound head locking grooves.
• F/C Port: CF3M (standard); Optional Duplex SS (CD3MN), Optional Super Duplex SS (CD3MWCuN).
• F/C Port Seal: Ethylene Propylene.
• Bearing Plate: 6061-T6 Aluminum alloy - Hard anodized (standard); Optional Stainless Steel 316L.
• Sealing Plate: Engineering Thermoplastic (standard).
• Permeate Port: Engineering Thermoplastic.
• Port Nut: Engineering Thermoplastic.
• Head Seal: Ethylene Propylene - O-Ring.
• Perm Port Seal: Ethylene Propylene - O-Ring.
• Quick Release Spiral Ring: 316 Stainless Steel.
• Saddle: Engineering Thermoplastic.
• Strap Assembly: 304 Stainless Steel-PVC Cushion (standard); Optional SS316, Optional SS316L.
• Strap Screw: 5/16-18 UNC, 18-8 Stainless Steel.
• Adapter: Engineering Thermoplastic.
• Adapter Seal: Ethylene Propylene - O-Ring.
• PWT Seal: Ethylene Propylene - O-Ring.
• Thrust Cone: Engineering Thermoplastic.

Dimensional and Weight Specifications:

Growth Under Pressure:

• For a length code –8 vessel:
  • Change in Diameter (∆DIA): 0.015 in. (0.4mm)
  • Change in Length (∆L): 0.2 in. (6mm)

Port Specifications:

• Permeate Port Selection:
  • Sizes: 1”, 1.25”, 1.5”
  • Connection Types: FNPT, MNPT, BSPTM, BSPTF, IPS GROOVED, SANITARY
  • Materials: PET/Noryl (standard 1.0" FNPT), SS316L, Zeron 100
• Feed/Concentrate Port Selection:
  • Material of Construction: CF3M (standard), Optional Duplex SS (CD3MN), Optional Super Duplex SS (CD3MWCuN).
  • Configuration: Standard CF3M 1D5D or Optional Multi-port (refer to specific sheet for multi-port selection).
  • Grooved End Port Sizes: D (1½”), E (2”), F (2½”).

Precautions

• Mount the shell on horizontal members at span “S” using compliant vessel supports.
• Align and center side ports with the manifold header.
• Use flexible type grooved-end pipe couplings (e.g., Victaulic® Style 77 or equivalent) at side ports, allowing a 0.125 inch gap.
• Provide flexibility in and support for piping manifolds to accommodate vessel growth under pressure.
• Provide overpressure protection set at no more than 105% of design pressure.
• Inspect end closures regularly and replace deteriorated components.
• Lubricate seals sparingly with non-petroleum based lubricants (e.g., Parker Super O-lube®, Glycerin, or suitable silicone-based lubricants).
• Do not work on any component until pressure is relieved from the vessel.
• Do not make rigid piping connections or clamp the vessel in a way that resists shell growth under pressure.
• Do not hang piping manifolds from ports or use the vessel to support other components.
• Do not tighten Permeate Port connections more than one turn past hand tight.
• Do not operate the vessel without connecting both Permeate Ports internally or plugging ports internally to prevent feed pressure exposure to external piping.
• Do not install Spacer on the downstream end of the vessel.
• Do not operate the vessel without the Thrust Cone installed downstream.
• Do not pressurize the vessel until verifying the Locking Ring is in place and fully seated.
• Do not tolerate leaks or allow end closures to be routinely wetted.

---

Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions present in the complete OEM PDF datasheet. For contractual data and the most up-to-date specifications, always refer to the official OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet