PV 100N EP

Summary

Product identification

This document describes an 8-inch End Port Pressure Vessel, product code 8E100N, manufactured by Phoenix Vessels. The body of the vessel is constructed entirely from glass-reinforced epoxy resins. These pressure vessels can accommodate membranes from various manufacturers, irrespective of length.

Assembly Drawing: 1MNC 3023

Operating limits

• Working Pressure: 100 psi (6.9 bar)
• Working Temperature: -7 to 45ºC

Mechanical / hydraulic

• Vessel Dimensions (all dimensions in mm, nominal unless stated otherwise)

  • Bump Diameter: Ø 235 max
  • Body Diameter: Ø 216
  • Bore Diameter: Ø 202.2

• Connections

  • Feed and concentrate connections: 1.5" Victualic
  • Product connections: 1.0" BSP Parallel (Male)

• Materials of Construction

  • Vessel Body: Glass Fibre Epoxy Resin
  • Feed/Concentrate Port: Thermoplastic
  • Hub: Thermoplastic
  • End Cap: Thermoplastic
  • Retaining Ring: Stainless Steel 316
  • Spiroloc Circlip: Stainless Steel 302
  • Adaptor: Thermoplastic (to suit membrane)
  • Adaptor Spacer Shims: Thermoplastic
  • Thrust Ring: Thermoplastic
  • Cap Head Screw: Stainless Steel A4
  • 'O' Seal End cap: EPDM (Size BS882)
  • 'O' Seal Feed/End Cap: EPDM (Size BS327)
  • 'O' Seal Hub/End Cap: EPDM (Size BS225)
  • 'O' Seal Prod/Adaptor: EPDM (Size BS219)
  • 'O' Seal Adaptor: EPDM (to suit membrane)
  • Strap: Stainless Steel/Neoprene
  • Saddle: Urethane
  • Nameplate: Vinyl

• Torque Specifications

  • M8 x 1.25 connections: 20Nm TORQUE MAX
  • Other connections (e.g., 1.5" Victaulic, 1" BSP): 8Nm TORQUE MAX
  • Tighten all bolts/nuts to 50% of the maximum torque figure; DO NOT EXCEED THE MAXIMUM TORQUE.

• ASME Conformance

  • Does not conform to ASME X

• Physical Data (Weights and Lengths) A table provides nominal values for Port to Port Length (+/-7mm), Max Dry Weight, and recommended Support Distances (for 2 and 3 supports) based on the number of 40" elements.

  Example entries from the table (for full data, including Support Distances, see the official PDF):

  • 1 element: 1549 mm length, 20 kg weight
  • 2 elements: 2565 mm length, 26 kg weight
  • 3 elements: 3581 mm length, 33 kg weight
  • 6 elements: 6629 mm length, 55 kg weight

  See the official PDF for exact tabulated values including support distances.

Disclaimer

This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions present in the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

PDF datasheet