PV 300N EP

Summary

Product Identification

This document describes an 8-inch End Port Pressure Vessel designed for a working pressure of 300 psi (20.7 bar). The product code is 8E300N. The body of the vessel is manufactured entirely from glass reinforced epoxy resins.

Order References & Specifications The following models are available, with dimensions in mm and weights in kg:

• 8E300N.1 (1 x 40" Element): Port to Port Length 1549 ±7mm, Support Distance (2 Supports Max/Min) 1100/700, Max Dry Weight 22 kg
• 8E300N.1.5 (1.5 x 40" Elements): Port to Port Length 2057 ±7mm, Support Distance (2 Supports Max/Min) 1400/1000, Max Dry Weight 26 kg
• 8E300N.2 (2 x 40" Elements): Port to Port Length 2565 ±7mm, Support Distance (2 Supports Max/Min) 1800/1300, Max Dry Weight 30 kg
• 8E300N.3 (3 x 40" Elements): Port to Port Length 3581 ±7mm, Support Distance (2 Supports Max/Min) 2400/1800, Support Distance (3 Supports Max/Min) 2400/1800, Max Dry Weight 38 kg
• 8E300N.4 (4 x 40" Elements): Port to Port Length 4597 ±7mm, Support Distance (2 Supports Max/Min) 2950/2400, Support Distance (3 Supports Max/Min) 3250/2400, Max Dry Weight 46 kg
• 8E300N.4.5 (4.5 x 40" Elements): Port to Port Length 5105 ±7mm, Support Distance (2 Supports Max/Min) 3200/2800, Support Distance (3 Supports Max/Min) 3700/2800, Max Dry Weight 50 kg
• 8E300N.5 (5 x 40" Elements): Port to Port Length 5613 ±7mm, Support Distance (2 Supports Max/Min) 3450/3150, Support Distance (3 Supports Max/Min) 4150/3150, Max Dry Weight 56 kg
• 8E300N.6 (6 x 40" Elements): Port to Port Length 6629 ±7mm, Support Distance (2 Supports Max/Min) 4000/3800, Support Distance (3 Supports Max/Min) 5000/3800, Max Dry Weight 65 kg
• 8E300N.7 (7 x 40" Elements): Port to Port Length 7645 ±7mm, Support Distance (3 Supports Max/Min) 5850/4850, Max Dry Weight 74 kg
• 8E300N.7.5 (7.5 x 40" Elements): Port to Port Length 8153 ±7mm, Support Distance (3 Supports Max/Min) 6200/5350, Max Dry Weight 78 kg

Operating Limits

• Working Pressure: 300 psi (20.7 bar)
• Working Temperature: 1º to 45ºC

Mechanical / Hydraulic

• Body Material: Glass Fibre Epoxy Resin
• Outer Diameter: Ø 238 mm max
• Bore Diameter: Ø 202.2 mm
• Feed and Concentrate Connections: 1.5" Victaulic
• Product Connections: 1.0" BSP Parallel (Female)
• Torque Specifications:
  • EXTRACTION SLOT: 20 Nm MAX
  • M8 x 1.25 Screws: 8 Nm MAX

Component Materials

• Vessel Body: Glass Fibre Epoxy Resin
• Feed/Concentrate Port: Stainless Steel - 316
• Hub: Thermoplastic
• End Cap: Thermoplastic
• Retaining Ring Segment: Stainless Steel 304
• Spiroloc Circlip: Stainless Steel 302
• Adaptor: Thermoplastic
• Adaptor Spacer Shims: Thermoplastic
• Thrust Ring: Thermoplastic
• Cap Head Screw: Stainless Steel Grade A4
• O-Seals (various): EPDM
• Strap: Stainless Steel/Neoprene
• Saddle: Urethane
• Nameplate: Vinyl

General Notes

• All dimensions are in mm and are nominal unless stated otherwise.
• Pressure vessels can be produced to cover all leading manufacturers' membranes regardless of length.
• The product does not conform to ASME X.
• Mount with drain hole down.
• Adhere to recommended support positions; contact Phoenix Vessel Technology if in doubt.

---

Disclaimer: This summary is based on extracted text and may omit figures, footnotes, or the most recent revisions. For contractual data, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

PDF datasheet