Datasheet summary
PV 1200X EP
Engineering summary from PDF text extraction for PV 1200X EP. Verify every value with the OEM datasheet.
Summary
Product identification
This document describes an 8" End Port Pressure Vessel with a 1200 psi (82.8 bar) rating.
- Product Code: 8E1200X
- Assembly Drawing: 1MNC 1616
- Design Code: ASME X
- The vessel body is manufactured completely from glass reinforced epoxy resins.
- Pressure vessels can be produced to cover leading manufacturers' membranes regardless of length.
Operating limits
- Working Pressure: 1200 psi (82.8 bar)
- Working Temperature: -7º to 45ºC
Mechanical / hydraulic
- All dimensions are in mm and are nominal unless stated otherwise.
- Max Vessel Diameter: Ø 277 mm
- Feed and concentrate connections: 1.5" Victaulic
- Product connections: 1.0" BSP Parallel (Male) or 1.0” NPT (Female)
- Mounting: Mount with drain hole down.
- Torque Specifications:
- M8 x 1.25 (Cap Head Screw): 8Nm TORQUE MAX
- Unspecified Bolt (Associated with item 3, Product Port): 12Nm TORQUE MAX
- Strap (Item 19): 15Nm TORQUE MAX
Order Reference Specifications
The following table details various configurations based on the number of 40" elements.
| Order Reference | No of 40" Elements | Port to Port Length +/-7mm | Max Support Position | Min Support Position | Max Dry Weight |
|---|---|---|---|---|---|
| 8E1200X.1 | 1 | 1702 | 875 | 500 | 61 kg |
| 8E1200X.1.5 | 1.5 | 2210 | 1400 | 500 | 73 kg |
| 8E1200X.2 | 2 | 2718 | 1890 | 500 | 85 kg |
| 8E1200X.3 | 3 | 3734 | 2910 | 960 | 108 kg |
| 8E1200X.4 | 4 | 4750 | 3190 | 1970 | 131 kg |
| 8E1200X.4.5 | 4.5 | 5258 | 3375 | 2480 | 143 kg |
| 8E1200X.5 | 5 | 5766 | 3560 | 2990 | 155 kg |
| 8E1200X.6 | 6 | 6782 | 4020 | 4020 | 177 kg |
| 8E1200X.7 | 7 | 7798 | 6170 c | 5090 c | 201 kg |
| 8E1200X.7.5 | 7.5 | 8306 | 6220 c | 5330 c | 213 kg |
Note: 'c' indicates central support required.
Component Materials
- Vessel Body: Glass Fibre Epoxy Resin
- Feed/Concentrate Port: Duplex St. Steel - 2507
- Product Port: Thermoplastic
- End Plate: Thermoplastic
- Backing Plate: Anodised Aluminium
- Retaining Ring Segment: St. Steel 316
- Support Washer: St. Steel 316
- Retaining Ring (Port): St. Steel 316
- Adaptor: Thermoplastic (to suit membrane)
- Anti-rotation Collet: Thermoplastic
- Thrust Ring: Thermoplastic
- 1” BSP Backnut: Thermoplastic
- Cap Head Screw: St. Steel Grade A4
- ‘O’ Seal Endplate: EPDM (BS882)
- ‘O’ Seal Feed Port: EPDM (BS225)
- ‘O’ Seal Prod/Endplate: EPDM (BS220)
- ‘O’ Seal Prod/Adaptor: EPDM (BS219)
- ‘O’ Seal Adaptor: EPDM (to suit membrane)
- Strap: St. Steel/Neoprene
- Saddle: Urethane
- Nameplate: Aluminium or Vinyl
Disclaimer: This summary is based solely on the provided text extract. It may not include all figures, footnotes, or the most recent revisions of the OEM datasheet. For contractual purposes, always refer to the official PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.