Datasheet summary
Protec Arisawa FRP-Collectors
Engineering summary from PDF text extraction for Protec Arisawa FRP-Collectors. Verify every value with the OEM datasheet.
Summary
Product identification
FRP collectors feature an innovative system utilizing a spindled head design where a chain of header pipes distributes feed or collects concentrate flow. Each sub-header is equipped with up to 6 side ports (1.5" diameter) made in FRP.
These products replace expensive high-grade materials like Super Stainless or Duplex Stainless with a fiberglass and epoxy resin construction.
Operating limits
- Design Pressure: 6000 psi (57 bar)
- Operating Temperature: 0 to 90 °C (32-194 °F)
- Hydrostatic Test Pressure: 1.5x design pressure
Mechanical / hydraulic
- Design and Qualification Code: ASME Section X
- Diameter of the FRP Distributor/Collector: 6" (DN 150)
- FRP Material: Fiberglass + Epoxy Resin
- Diameter of ports: 1.5" (DN 40)
- Port Material: Super Stainless / Dual Stainless
- Maximum Longitudinal Elongation: 4 mm for 6000 mm length
Each sub-header pipe distributes feed or collects concentrate flow. Each sub-header is equipped with up to 6 side ports (1.5" diameter) on a length of 2 meters.
Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or the latest revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.