Datasheet summary
THE 60
Engineering summary from PDF text extraction for THE 60. Verify every value with the OEM datasheet.
Summary
Product identification
- Product Name: Tubular Heat Exchanger
- Type: THE (High Pressure - 60 BAR)
- Manufacturer: Wila A/S
Operating limits
Product Side (Tube Side)
- Maximum Pressure: 60 bar[g] (870 PSI)
- Maximum Temperature: 85°C
Service Side (Shell Side)
- For sizes 0.5 m² and 1 m²:
- Maximum Pressure: 10 bar[g]
- Maximum Temperature: 185°C
- For size 2 m²:
- Maximum Pressure: 8 bar[g]
- Maximum Temperature: 176°C
- For size 3 m²:
- Maximum Pressure: 6 bar[g]
- Maximum Temperature: 165°C
Note: Limits for fluids other than steam require consulting the "Heat exchangers – pressure and temperature relations" document.
Feed water / Product characteristics
- Materials: EN.1.4404 (AISI 316L) stainless steel
- Surface Finish: Sanitary surface finish
- Outside surface roughness: ≤ 1,6µm
- Internal tube side roughness: ≤ 0,8µm
- Fluid Compatibility: All fluid media must be compatible with EN.1.4404 (AISI 316L) Stainless Steel.
- Intended Use: Fluid to fluid heat transfer (cooling or heating). Suitable for foodstuff fluids, such as dairy products and juices.
Product water / Service fluid characteristics
- Fluid Group: Designed for fluid group 2 (non-dangerous fluids) according to PED directive 2014/68/EU.
Electrical
No electrical specifications were found in the extract.
Mechanical / hydraulic
General Construction
- Design: Two pressure chambers within a combined housing.
- Tube side: Inner chamber containing the tubes.
- Shell side: Outer chamber formed by the shell.
Dimensions and Configurations
The following table provides a summary for the Ø133 shell diameter models. Detailed dimensions (A, B, C, D) and tube bank configurations are available for specific models:
| Model | Heat Transfer Area | Product Side Connections | Shell Side Connections | Tube Bank (example) | Dry Weight |
|---|---|---|---|---|---|
| THE-.5-133-60 | 0.5 m² | See table below | See table below | 61 pc Ø12x1mm | 10 kg |
| THE-01-133-60 | 1 m² | See table below | See table below | 61 pc Ø12x1mm | 18 kg |
| THE-02-133-60 | 2 m² | See table below | See table below | 61 pc Ø12x1mm | 33 kg |
| THE-03-133-60 | 3 m² | See table below | See table below | 61 pc Ø12x1mm | 48 kg |
Tube Side Connections (P1 and P2) for Ø133mm shell:
- DN100 – DN80 – DN65 (in accordance with DIN 32676-A)
- 4” (Ø101.6) – 3” (Ø76.1) – 2.5” (Ø63.5) (In accordance with ISO 2852-2)
Shell Side Connections (S1 and S2):
- DN50 – DN40 (in accordance with DIN 32676-A)
- 2” (Ø51) – 1.5” (Ø38) (in accordance with ISO 2852-2)
Note: Other connection types and sizes are available upon request.
Regulations and Directives
- European Commission regulation No. 2023/2006 (Good Manufacturing Practices)
- European Parliament directive No. EN 1935/2004 (Food Contact Materials)
- European Parliament directive No. EN 1907/2006 (Chemical Restrictions (REACH))
- PED - Article 4.3 (SEP) - European Parliament directive No. 2014/68/EU (Pressure Equipment Directive)
Documentation
The following documentation is typically provided:
- Customer drawing with description and design data table
- Declaration of conformity
- Pressure test certificate
- User Manual
Optional documentation:
- 3.1 material certificates according to EN 10204
- Weld-logs with associated welding certificates according to DS/EN ISO 9601-1
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or revisions. Contractual data must be verified against the official OEM PDF revision used for the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.