Proline Promass I 500

Summary

Product identification

• Product: Proline Promass I 500 / 8I5B
• Type: Coriolis flowmeter
• Headline: Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os.
• Field of application: Measurement of liquids and gases in applications requiring low pressure loss and gentle fluid treatment.

Operating limits

• Max. process pressure: PN 100, Class 600, 63K
• Medium temperature range: –50 to +150 °C (–58 to +302 °F)
• Ambient temperature range (Standard): –40 to +60 °C (–40 to +140 °F)
• Ambient temperature range (Option): –50 to +60 °C (–58 to +140 °F)

Feed water

• Measuring range: 0 to 180 000 kg/h (0 to 6600 lb/min)

Product water

• Measured variables: Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration, viscosity

Performance

• Max. measurement error (Mass flow, liquid): ±0.10 %
• Max. measurement error (Volume flow, liquid): ±0.10 %
• Max. measurement error (Mass flow, gas): ±0.50 %
• Max. measurement error (Density, liquid): ±0.0005 g/cm³

Mechanical / hydraulic

• Nominal diameter range: DN 8 to 80 (⅜ to 3")
• Wetted materials:
  • Measuring tube: Titanium grade 9
  • Connection: Titanium grade 2
• Sensor housing material: 1.4301 (304), corrosion resistant
• Sensor connection housing (standard): AlSi10Mg, coated
• Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L
• Transmitter housing material: AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat
• Degree of protection (Sensor remote version, standard): IP66/67, type 4X enclosure
• Degree of protection (Sensor remote version, option): IP69
• Degree of protection (Transmitter remote version): IP66/67, Type 4X enclosure

Electrical

• Outputs: 4 outputs:
  • 4-20 mA HART (active/passive)
  • 4-20 mA WirelessHART
  • 4-20 mA (active/passive)
  • Pulse/frequency/switch output (active/passive)
  • Double pulse output (active/passive)
  • Relay output
• Inputs:
  • Status input
  • 4-20 mA input
• Digital communication: HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, PROFINET, PROFINET over Ethernet-APL, Ethernet/IP, OPC-UA
• Power supply:
  • DC 24 V
  • AC 100 to 230 V
  • AC 100 to 230 V / DC 24 V (non-hazardous area)

Approvals and Certificates

• Hazardous area approvals: ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, KC
• Product safety: CE, C-tick, EAC marking
• Functional safety: Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
• Metrological approvals: Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025); Heartbeat Technology complies with requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation)
• Pressure approvals: PED, CRN
• Material certificates: 3.1 material
• Hygienic approvals: 3-A, EHEDG, cGMP

Features

• Energy-saving – full-bore design enables minimal pressure loss.
• Fewer process measuring points – multivariable measurement (flow, density, temperature).
• Space-saving installation – no in-/outlet run needs.
• Full access to process and diagnostic information – numerous, freely combinable I/Os and Ethernet.
• Reduced complexity and variety – freely configurable I/O functionality.
• Integrated verification – Heartbeat Technology.
• Straight, easy-to-clean single-tube system.
• TMB technology.
• Remote transmitter version with up to 4 I/Os.
• Backlit display with touch control and WLAN access.
• Standard cable between sensor and transmitter.

---

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror