Proline Promass P 500

Summary

Product identification

Product: Proline Promass P 500 / 8P5B Type: Coriolis flowmeter Headline: Specialist for life sciences, as remote version with up to 4 I/Os. Dedicated to applications under sterile conditions in the life sciences industry.

Field of application

• Specialist for sterile processes in the life sciences industry.
• Dedicated to biotech applications requiring highest compliance with guidelines and regulations.
• Suitable for liquids, gas, and density/concentration measurements.

Sensor features

• Highest process quality – fully compliant to industry requirements.
• Fewer process measuring points – multivariable measurement (flow, density, temperature).
• Space-saving installation – no in-/outlet run needs.
• ASME BPE, 3-A and EHEDG conform & low delta ferrite.
• Electropolished measuring tube in 1.4435 (316L).

Transmitter features

• Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses.
• Reduced complexity and variety – freely configurable I/O functionality.
• Integrated verification – Heartbeat Technology.
• Fast recovery from CIP/SIP.
• Remote version with up to 4 I/Os; hygienic sensor connection housing with IP69.
• Backlit display with touch control and WLAN access.

Operating limits

• Max. process pressure: PN 40, Class 150, 20K
• Medium temperature range:
  • Standard: –50 to +150 °C (–58 to +302 °F)
  • Option: –50 to +205 °C (–58 to +401 °F)
• Ambient temperature range:
  • Standard: –40 to +60 °C (–40 to +140 °F)
  • Option: –50 to +60 °C (–58 to +140 °F)

Feed water / Medium

• Nominal diameter range: DN 8 to 50 (⅜ to 2")

Product water / Measured variables

• Mass flow
• Density
• Temperature
• Volume flow
• Corrected volume flow
• Reference density
• Concentration

Performance

• Max. measurement error:
  • Mass flow (liquid): ±0.10 %
  • Volume flow (liquid): ±0.10 %
  • Density (liquid): ±0.0005 g/cm³
• Measuring range: 0 to 70 000 kg/h (0 to 2570 lb/min)

Mechanical / Hydraulic

• Wetted materials:
  • Measuring tube: 1.4435 (316L)
  • Connection: 1.4435 (316L); 1.4404 (316/316L)
• Sensor housing material: 1.4301 (304), corrosion resistant
• Sensor connection housing (standard): AlSi10Mg, coated
• Sensor connection housing (option): 1.4301 (304); 1.4404 (316L)
• Transmitter housing material: AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat
• Degree of protection:
  • Sensor remote version (standard): IP66/67, type 4X enclosure
  • Sensor remote version (option): IP69
  • Transmitter remote version: IP66/67, Type 4X enclosure

Electrical

• Outputs (4 outputs):
  • 4-20 mA HART (active/passive)
  • 4-20 mA WirelessHART
  • 4-20 mA (active/passive)
  • Pulse/frequency/switch output (active/passive)
  • Double pulse output (active/passive)
  • Relay output
• Inputs:
  • Status input
  • 4-20 mA input
• Digital communication: HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, PROFINET, PROFINET over Ethernet-APL, Ethernet/IP, OPC-UA
• Power supply:
  • DC 24 V
  • AC 100 to 230 V
  • AC 100 to 230 V / DC 24 V (non-hazardous area)

Approvals and Certificates

• Hazardous area approvals: ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, KC
• Product safety: CE, C-tick, EAC marking
• Functional safety: According to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
• Metrological approvals and certificates: Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025). Heartbeat Technology complies with ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation).
• Pressure approvals and certificates: PED, CRN
• Material certificates: 3.1 material
• Hygienic approvals and certificates: 3-A, EHEDG, ASME BPE, ISPE, cGMP

---

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror