Proline Promass S 500

Summary

Product identification

• Product name: Proline Promass S 500 / 8S5B
• Type: Coriolis flowmeter
• Headline: Easy-to-clean device with self-drainable single-tube system, as remote version with up to 4 I/Os.
• Application: Dedicated to applications in the food and beverage industry requiring optimal cleanability under hygienic conditions.

Features and specifications

• Measuring principle: Coriolis
• Sensor features:
  • Easily cleanable and fully self-drainable tube design for increased process safety.
  • Multivariable measurement (flow, density, temperature) reduces the number of process measuring points.
  • Space-saving installation with no in-/outlet run requirement.
  • Large range of hygienic process connections.
  • 3-A and EHEDG conform.
  • Fast recovery from CIP/SIP.
• Transmitter features:
  • Numerous, freely combinable I/Os and fieldbuses for full access to process and diagnostic information.
  • Freely configurable I/O functionality reduces complexity and variety.
  • Integrated verification with Heartbeat Technology.
  • Remote version with up to 4 I/Os.
  • Hygienic sensor connection housing with IP69.
  • Backlit display with touch control and WLAN access.
  • Standard cable between sensor and transmitter.

Operating limits

• Nominal diameter range: DN 8 to 50 (⅜ to 2")
• Max. measurement error:
  • Mass flow (liquid): ±0.10 %
  • Volume flow (liquid): ±0.10 %
  • Density (liquid): ±0.0005 g/cm³
• Measuring range: 0 to 70 000 kg/h (0 to 2570 lb/min)
• Max. process pressure: PN 40, Class 150, 20K
• Medium temperature range: –50 to +150 °C (–58 to +302 °F)
• Ambient temperature range:
  • Standard: –40 to +60 °C (–40 to +140 °F)
  • Option: –50 to +60 °C (–58 to +140 °F)

Feed water

• Measured variables: Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration

Product water

• Measured variables: Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration

Electrical

• Outputs: 4 outputs:
  • 4-20 mA HART (active/passive)
  • 4-20 mA WirelessHART
  • 4-20 mA (active/passive)
  • Pulse/frequency/switch output (active/passive)
  • Double pulse output (active/passive)
  • Relay output
• Inputs:
  • Status input
  • 4-20 mA input
• Digital communication: HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, PROFINET, PROFINET over Ethernet-APL, Ethernet/IP, OPC-UA
• Power supply:
  • DC 24 V
  • AC 100 to 230 V
  • AC 100 to 230 V / DC 24 V (non-hazardous area)

Mechanical / hydraulic

• Wetted materials:
  • Measuring tube: 1.4435 (316L)
  • Connection: 1.4435 (316L); 1.4404 (316/316L)
• Sensor housing material: 1.4301 (304), corrosion resistant
• Sensor connection housing (standard): AlSi10Mg, coated
• Sensor connection housing (option): 1.4301 (304); 1.4404 (316L)
• Transmitter housing material: AlSi10Mg, coated; Polycarbonat
• Degree of protection:
  • Sensor remote version (standard): IP66/67, type 4X enclosure
  • Sensor remote version (option): IP69
  • Transmitter remote version: IP66/67, Type 4X enclosure
• Display/Operation: 4-line backlit display with touch control (operation from outside)

Approvals and certifications

• Hazardous area approvals: ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, KC
• Product safety: CE, C-tick, EAC marking
• Functional safety: According to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
• Metrological approvals and certificates: Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025); Heartbeat Technology complies with ISO 9001:2015 requirements for measurement traceability.
• Pressure approvals and certificates: PED, CRN
• Material certificates: 3.1 material
• Hygienic approvals and certificates: 3-A, EHEDG, cGMP

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror