Prosonic Flow Inline 92F

Summary

Product identification

• Product: Prosonic Flow Inline 92F
• Type: Ultrasonic flowmeter
• Measuring principle: Ultrasonic flow
• Product headline: Highly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs.
• Field of application: Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.

Operating limits

• Max. process pressure: PN 40 / ASME Cl. 300 / JIS 20K
• Medium temperature range: -40 to +150 °C (-40 to +302 °F)
• Medium temperature range (optional): -40 to +200 °C (-40 to +392 °F)
• Ambient temperature range (compact): -40 to +60 °C (-40 to +140 °F)
• Ambient temperature range (remote sensor): -40 to +80 °C (-40 to +176 °F)
• Ambient temperature range (remote transmitter): -40 to +60 °C (-40 to +140 °F)
• Max. measurement error (standard): ±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
• Max. measurement error (optional): ±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
• Measuring range: 0.5 to 10 m/s (1.6 to 33 ft/s)

Feed water

• Liquids: Suitable for homogeneous conductive and non-conductive liquids.

Product water

• Measured variables: Volume flow, calculated mass flow, sound velocity, flow velocity, signal strength.

Electrical

• Power supply: 2 wire loop powered
• Outputs:
  • 1x 4-20 mA HART
  • 1x Pulse/frequency/switch output (passive)
• Digital communication: HART
• Transmitter housing material: AlSi10Mg, coated
• Degree of protection: IP67, type 4X enclosure
• Degree of protection (remote option): IP68 type 6P enclosure

Mechanical / hydraulic

• Nominal diameter range (2 path version): DN80 to 300 (3 to 12")
• Nominal diameter range (3 path version): DN25 to 50 (1 to 2")
• Nominal diameter range (4 path version): DN80 to 300 (3 to 12")
• Wetted materials (Sensor):
  • A351-CF3M (DN25 to 100)
  • 1.4404/TP316/TP316L or A106 GrB (DN150 to 300)
• Wetted materials (Transducer): 1.4404/316/316L
• Wetted materials (Flanges): 1.4404/316/316L or A105/1.0432
• Hazardous area approvals: ATEX, FM, CSA, JPNm, UK Ex
• Other approvals and certificates: 3.1 material (wetted parts), calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), CRN, AD2000 PED, EAC marking.
• Metrological approvals and certificates: Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025).
• Pressure approvals and certificates: CRN, PED, AD2000.
• Material certificates: 3.1 material (wetted parts).

Display / Operation

• 2-line backlit display with 3 push buttons.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror