Flexdip CYA112

Summary

Product identification

• Product Name: Flexdip CYA112
• Product Type: Immersion assembly for water and wastewater.
• Document Reference: TI00432C/07/EN/14.19

Application

• Water and wastewater
• Plant construction

Operating limits

• Ambient temperature range: -20 to 60 °C (-4 to 140 °F)
• Process temperature range: 0 to 60 °C (32 to 140 °F)
• Process pressure range: Unpressurized installation

Mechanical / hydraulic

• Materials:
  • Immersion tube: Stainless steel 1.4404 (AISI 316 L) or PVC
  • Connecting pipe: Stainless steel 1.4404 (AISI 316 L) or PVC
  • Weld-on threads: Stainless steel 1.4571 (AISI 316 Ti) or PVC
  • Sensor adapter: POM - GF
  • Quick fastener: POM - GF
  • Multifunctional clamp ring: PA 6
  • Cap for pipe end: PE
  • Chain bracket: Stainless steel 1.4571 (AISI 316 Ti) or 1.4404 (AISI 316 L)
  • O-rings: EPDM
  • Float (yellow, until mid-2012 approx.): EVA
  • Float (black, from mid-2012 approx.): EPP
• Dimensions:
  • Immersion tube diameter (PVC and stainless steel): Ø 40 mm (1.6 in)
• Available Lengths:
  • Stainless steel version: 600 mm (23.6 in), 1 200 mm (47.2 in), 1 800 mm (70.9 in), 2 400 mm (94.5 in), 3 600 mm (141.7 in)
  • PVC version: 600 mm (23.6 in), 1 200 mm (47.2 in), 1 800 mm (70.9 in), 2 400 mm (94.5 in)
  • Note: For PVC tubes longer than 1 200 mm (47.2 in), client must glue components on-site.
• Maximum assembly length: 3 600 mm (141.7 in) for stainless steel, 2 400 mm (94.5 in) for PVC.
• Threads:
  • Immersion tube connection: M36 male thread
  • Connecting pipe thread for sensors: G 1" female thread
• Sensor Adapters: Available for NPT ¾", G ¾", Pg 13.5 threads.
• Weight:
  • PVC Immersion tube (600 mm): 0.3 kg (0.7 lb)
  • PVC Immersion tube (1200 mm): 0.6 kg (1.3 lb)
  • PVC Immersion tube (1800 mm): 0.95 kg (2.1 lb)
  • PVC Immersion tube (2400 mm): 1.3 kg (2.8 lb)
  • Stainless steel Immersion tube (600 mm): 0.6 kg (1.3 lb)
  • Stainless steel Immersion tube (1200 mm): 1.2 kg (2.6 lb)
  • Stainless steel Immersion tube (1800 mm): 1.8 kg (4.0 lb)
  • Stainless steel Immersion tube (2400 mm): 2.4 kg (5.3 lb)
  • Stainless steel Immersion tube (3600 mm): 3.5 kg (7.7 lb)
  • Multifunctional clamp ring: 0.15 kg (0.33 lb)
  • Weight for PVC immersion tube (stabilization): 0.32 kg (0.71 lb)
• Mounting:
  • Variable assembly length in increments of 600 mm (23.6 in).
  • Immersion tube must protrude at least 100 mm (3.94 in) over the retaining point.
  • Quick fastener available for fast sensor installation/replacement and twist-free installation of fixed-cable sensors.

Electrical

• Potential equalization: Required at the place of installation for all electrically conductive parts.

Certifications

• Ex approval: Stainless steel version (CYA112-21*2) suitable for hazardous areas (Zone 1 and 2). Does not have its own ignition source, so ATEX Directive 2014/34/EU does not apply.

Disclaimer

This summary is an extraction from a datasheet and may not include all figures, footnotes, or revisions. Contractual data must always be verified against the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror