Memocheck CYP02E

Summary

Product identification

Memocheck CYP02E is a service tool for fast on-site checking of measuring systems incorporating Memosens technology.

Application

Typical applications include:

• Installation check of transmitters with Memosens technology
• Fast configuration check of transmitter and process control system
• Troubleshooting by performing sensor simulation with fixed values

Benefits

• Increased plant safety thanks to sensor and error simulation
• Time savings thanks to quick and easy installation check during commissioning
• Quick and easy checking of transmitter and PLC configuration
• Robust sensor simulator for a variety of applications

Performance characteristics

The Memocheck CYP02E consists of two interconnected sensor plug-in heads. The following simulation values can be output depending on the order:

pH glass and pH ISFET simulation

• Temperature: 25 °C (77 °F)
• pH glass: 4
• pH ISFET: 7
• Temperature: 60 °C (140 °F)

pH glass and pH glass simulation

• Temperature: 25 °C (77 °F)
• pH glass: 4
• pH glass: 7
• Temperature: 60 °C (140 °F)

pH glass and ORP simulation

• Temperature: 25 °C (77 °F)
• pH glass: 4
• ORP potential: 750 mV
• Temperature: 90 °C (194 °F)

pH glass and oxygen simulation

• Temperature: 25 °C (77 °F)
• pH glass: 4
• Oxygen: 60 nA ¹)
• Temperature: 60 °C (140 °F) ¹⁾ Sensor current

pH glass and conductive measurement of conductivity simulation

• Temperature: 25 °C (77 °F)
• pH glass: 4
• Conductivity: 20 µS/cm
• Temperature: 60 °C (140 °F)

pH glass and chlorine simulation

• Temperature: 25 °C (77 °F)
• pH glass: 4
• Chlorine: 60 nA ¹)
• Temperature: 25 °C (77 °F) ¹⁾ Sensor current

The data listed above are displayed on the transmitters. The Memocheck CYP02E is maintenance-free.

Environment

• Ambient temperature range: –15 to 70 °C (5 to 158 °F)
• Storage temperature range: –15 to 70 °C (5 to 158 °F)
• Degree of protection: IP65
• Electromagnetic compatibility: Interference emission and interference immunity as per EN 61326-1:2013, Class A for Industry

Process conditions

NOTICE: Memocheck CYP02E is not suitable for use directly in the process. The device can be damaged or destroyed in the process.

• Only use the device to simulate measured values outside the process!
• The sensor simulators must not be operated under electrostatically critical process conditions. Avoid strong steam or dust currents that act directly on the connection system.

Mechanical construction

• Dimensions:
  • Height: 89 mm (3.5 in)
  • Width: 25.8 mm (1.02 in)
  • Depth: 37.4 mm (1.47 in)
  • Diameter of plug-in heads: Ø 20 mm (0.79 in)
• Weight: 40 g
• Materials:
  • White plastic: PET
  • Blue plastic: PPS GF 40

Certificates and approvals

• CE mark: The product meets the requirements of the harmonized European standards.
• Hazardous area approvals:
  • ATEX: II 2G Ex ia IIC T6 Gb
  • IECEx: Ex ia IIC T6 Gb
  • NEPSI: NEPSI Ex ia IIC T6 Gb
  • CSA C/US: CSA C/US IS Cl. I Div. 1 GP A-D T6; CSA C/US IS Cl. I Zone 0 AEx ia IIC T6
  • Japan Ex: JPN Ex ia IIC T6 Gb
  • INMETRO: INMETRO Ex ia IIC T6 Gb

Ex versions of digital sensor simulators with Memosens technology are identified by an orange-red ring on the plug-in head.

Scope of delivery

• 1 Memocheck CYP02E with 2 plug-in heads
• 1 x Operating Instructions

Accessories

• Memosens data cable CYK10
• Memosens laboratory cable CYK20

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror