Series 960s

Summary

Product identification

Series 960s UV Ozone Photometer

Description

The Aeroqual Series 960 UV Ozone Photometer is designed for measurement and control of ozone in the range 0-200 ppm using a single-beam UV photometer. It features a wall-mountable enclosure with excellent ingress protection and offers advanced monitoring and control for singular or network solutions. PC data logging and networking software are available.

Features

• Wide measurement range (0-200 ppm)
• Single-beam UV photometer
• Pump sampling via PTFE tubing (e.g., monitoring outside of a room or duct)
• Multiple outputs (transistor, 4-20mA, RS485)
• PC data logging and networking option
• LED display and Temperature/RH sensor options

Specifications

• Calibrated range: 0-200 ppm Ozone
• Precision:
  • <±5% of reading above 0.2 ppm
  • ±0.01 ppm below 0.2 ppm
• Resolution: 0.01 ppm
• Sampling method: Brushless DC diaphragm pump
• T<SUB>90</SUB>: <60s
• Sample flow rate: 0.4 ±0.05 LPM
• Wetted materials: Kynar, Teflon PFA, quartz, aluminium, Viton
• Inlet filter: 5 µm pore size, 37 mm PTFE filter
• Pneumatic connections: Kynar ¼” compression fittings

Environmental operating conditions

• Temperature: 0-40°C
• RH: 0-95% RH (non-condensating)

Power requirements

• 24V DC, 2A

Display (optional)

• 4.5 digit LED (red)

Analog outputs

• 4-20mA (opto-isolated)
• 12-24V DC (30V DC max)
• Maximum loop resistance 500Ω at 24V
• 16 bit resolution

Digital interface

• RS485 (2 wire) protocol supplied

Transistor outputs

• 4 x transistor outputs (Control, Diagnostics, High Alarm, Low Alarm)

User configurable set points

• Low alarm, High alarm, Control

Inputs

• Standby toggle (turns off pump)

Enclosure

• ABS Plastic, IP65 (Except inlet and Exhaust)

Configuration software

• Supplied

Options

• DC relay board: 2x SPDT 10A max switching current

Accessories (optional)

• PC data logging & networking software: Product code: R60
• USB interface: Product code: R53 (RS485-to-USB converter)
• Power supply: Product code: R38 (24V DC DIN rail mount 100-250V AC)
• Inlet filters: Product code: R12 (25 pack)
• Additional tubing: Product code: R66 (10 m x 6.25 mm OD PFA tubing)

Disclaimer: This summary is an extraction from a datasheet and may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror