Datasheet summary
Series 130s
Engineering summary from PDF text extraction for Series 130s. Verify every value with the OEM datasheet.
Summary
Product identification
Series 130s Ozone Controller
Features
- Active sampling for accuracy
- LED ozone level indicator
- Low service maintenance
- Replaceable sensor head
- Tamperproof enclosure
- Water & dust resistant
- Alarm & control outputs
- Simple plug & play
Applications
- Ozone generator control
- Industrial monitoring
- Health & safety
- Alarm systems
Specifications
Ozone Sensor Head
| Feature | Low Range | High Range |
|---|---|---|
| Calibrated Range | 0-0.5 ppm | 0-10 ppm |
| Maximum Exposure | 1 ppm | 15 ppm |
| Lowest Detection Limit | 0.001 ppm | 0.01 ppm |
| Accuracy of Calibration | <±0.008 ppm (0-0.1 ppm); <±10% (0.1-0.5 ppm) | <±0.1 ppm (0-1 ppm); <±15% (1-10 ppm) |
| Response Time (T90) | < 60 s | < 60 s |
Operating Conditions
- Temperature: -5 to 40°C
- Humidity: 5 to 95% RH non-condensing
Electrical
- Power supply: 12VDC (switching power adaptor 100-240VAC supplied)
- I/O connectors (power, control signal): Screw terminals and cable gland
- Setting control and alarms: Dip switches (Alarm/Control Mode and relay/alarm set point)
- External signal for control and switching
- Relays: 2 relays, 28V max, 150mA max
- External signal functions: Low Alarm, High Alarm, Control
Mechanical / Hydraulic
- Removable / replaceable sensor head: Yes (sensor head can also be refurbished)
- Audible alarm: Piezoelectric (active in Alarm Mode)
- LED status indicator (tri-colour): Displays Alarm levels, Control band, Diagnostics
- Yellow: Ozone concentration is below low alarm limit
- Green: Ozone concentration is between low and high limits
- Red: Ozone concentration is above high alarm limit
- Enclosure casing and rating: Fibre reinforced plastic; IP41 & NEMA 2 equivalent
- Enclosure size: 180W x 110H x 90D mm (7⅛W x 4¾H x 3½D in)
- Weight: < 850 g (< 30 oz)
Approvals
- Part 15 of FCC Rules
- EN 50082-1: 1997
- EN 50081-1: 1992
Disclaimer: This extracted summary may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.