DULCOTEST RHEIC Pt SE

Summary

Product identification

• Product Name: RHEIC-Pt-SE
• Order Number: RHEIC-Pt-SE, Order no. 1082281
• Series: Prominent Sensors
• Document Revision: TM DT 041 12/17 EN

Operating limits

• ORP voltage: -1500 ... +1500 mV
• Temperature: 0 … 80 °C
• Max. pressure: 6.0 bar
• Min. conductivity: min. 50 μS/cm

Feed water

• Electrolyte: gel containing potassium chloride with a large KCI reservoir
• Diaphragms: PTFE ring diaphragm

Mechanical / hydraulic

• Sensor shaft material: Plastic
• Sensor shaft diameter:
  • 17 ± 0.2 mm (below the ½" NPT thread)
  • 22 ± 0.2 mm (below the ¾" thread)
• Fitting length:
  • 20 ± 0.2 mm (from the lower end of the ½" thread)
  • 60 ± 0.2 mm (from the lower end of the ¾" thread)
• Fitting position: vertical up to +15 °
• Screw-in thread: ½" and ¾" NPT thread

Electrical

• Electrical connection: SN6 plug-in head, rotatable with a ProMinent cable

Controllers

• Compatible Controllers: All DULCOMETER® controllers and solenoid metering pumps types D_4a and delta®

Typical application

• Municipal and industrial waste water
• Cooling water
• Process water
• Water in the chemical industry and paper making
• General use for water with solid fractions

Measuring principle

• Technology: Direct potentiometric measurement, 2 electrodes, double junction, gel electrolyte, large Teflon diaphragm.

Disclaimer: The extracted information may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror