Datasheet summary
AmberLite FPC88 UPS
PDF datasheet mirror for AmberLite FPC88 UPS (DuPont). Verify with OEM before design.
Summary
Product Identification
- Product Name: AmberLite™ FPC88 UPS Ion Exchange Resins
- Type: Uniform Particle Size, Macroporous, Strong Acid Cation Resin
- Manufacturer: DuPont
Description
AmberLite™ FPC88 UPS Ion Exchange Resins are uniform particle size, macroporous, strong acid cation resins designed for applications such as:
- Deashing sweeteners to produce low-conductivity syrups
- Purifying organic acids
- Deashing/demineralizing fruit juices, other beverages, and food additives
The macroporous matrix provides excellent mechanical strength and good operating capacity. Premium-grade resins can extend syrup run times and improve plant capacity. Uniform bead size reduces sweetwater production and rinse requirements.
AmberLite™ FPC88 UPS H Ion Exchange Resin is shipped in the regenerated (H⁺) ionic form for deashing or can be paired with AmberLite™ FPA22 UPS OH Ion Exchange Resin for mixed bed polishing. AmberLite™ FPC88 UPS Ion Exchange Resin shipped in the Na⁺ form is intended for long-duration shipments or inventory.
Applications
- Corn and starch sweetener deashing
- Citric and lactic acid deashing
- Whey, gelatin, and glycerin deashing
- Fruit juice deashing
- Beverage demineralization
Typical Properties
Physical Properties
- Copolymer: Styrene-divinylbenzene
- Matrix: Macroporous
- Type: Strong acid cation
- Functional Group: Sulfonic acid
- Physical Form: White to yellow, opaque, spherical beads
Chemical Properties
| Property | H⁺ Form | Na⁺ Form |
|---|---|---|
| Total Exchange Capacity | ≥ 1.7 eq/L | ≥ 1.8 eq/L |
| Water Retention Capacity | 46 – 56% | 42 – 50% |
| Particle Diameter | 550 ± 50 µm | 550 ± 50 µm |
| Effective Size | 400 – 720 µm | 400 – 720 µm |
| Whole Uncracked Beads | ≥ 95% | ≥ 95% |
| Swelling (Na⁺ → H⁺) | 5% | 5% |
| Particle Density | 1.2 g/mL | 1.2 g/mL |
| Shipping Weight | 770 g/L | 800 g/L |
Note: For additional particle size information, refer to the Particle Size Distribution Cross Reference Chart (Form No. 45-D00954-en).
Suggested Operating Conditions
- Maximum Operating Temperature (H⁺ form): 93°C (200°F)
- pH Range: 0 – 14
- Bed Depth, min.: 910 mm (3.0 ft)
- Flowrates:
- Service: 2 – 4 BV*/h
- Backwash: See Figure 1 in the official PDF
- Fast Rinse (if applicable): 2 – 10 BV/h
- Contact Time:
- Regeneration: ≥30 – 45 minutes
- Displacement Rinse: ≥30 – 45 minutes
- Total Rinse Requirement: 2 – 5 BV
- Regenerant (HCl):
- Concentration: 7%
- Level, 100% basis: 80 – 96 kg/m³ (5 – 6 lb/ft³)
- Temperature, max.: 93°C (200°F)
1 BV (Bed Volume) = 1 m³ solution per m³ resin or 7.5 gal per ft³ resin. Regeneration level may be lower for counter-current regeneration systems.
Hydraulic Characteristics
Bed expansion and pressure drop data are presented in Figures 1 and 2 of the official PDF, respectively. Equations are provided for calculating flow rates at different temperatures and pressure drop expectations based on service flow rate and viscosity.
Product Stewardship
DuPont is committed to product stewardship, assessing safety, health, and environmental information for its products. Users are encouraged to review their manufacturing processes and applications to ensure products are not used in unintended ways. Consult Safety Data Sheets (SDS) prior to use.
WARNING: Oxidizing agents like nitric acid can attack organic ion exchange resins, potentially causing degradation or violent reactions. Consult knowledgeable sources before using strong oxidizing agents.
Disclaimer: This extracted summary may not include all figures, footnotes, or revisions. Contractual data must be confirmed against the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.