AmberTec UP6040 H OH PDS

Summary

Product identification

AmberTec™ UP6040 H/OH Ion Exchange Resin is a semiconductor-grade, non-separable, uniform particle size, mixed bed ion exchange resin.

• Previous Name: AMBERJET™ UP6040 Ion Exchange Resin.
• Intended Use: Final polishing service in high-purity water treatment applications, specifically in non-regenerable final polishing mixed beds in ultrapure water systems for the semiconductor industry.

Description

This is a pre-mixed resin composed of an equivalent mixture of high-capacity, fully regenerated strong acid and strong base gel-type ion exchange resins on a 1:1 equivalent basis. It is designed to reduce resin separation during handling and ensure optimal performance in polishing vessels. The uniform particle size maximizes kinetic performance for high service flowrates.

AmberTec™ UP6040 H/OH is designed for non-regenerable applications and is not recommended for use in regenerable mixed bed applications.

Typical Properties

Cation Resin

• Copolymer: Styrene-divinylbenzene
• Matrix: Gel
• Type: Strong acid cation
• Functional Group: Sulfonic acid
• Physical Form: Dark amber, translucent, spherical beads
• Ionic Form as Shipped: H⁺
• Total Exchange Capacity: ≥ 2.00 eq/L (H⁺ form)
• Water Retention Capacity: 45.0 – 51.0% (H⁺ form)
• Ionic Conversion (H⁺): ≥ 99%
• Particle Size:
  • Particle Diameter: 525 ± 50 µm
  • Uniformity Coefficient: ≤ 1.20
  • < 425 µm: ≤ 0.5%

  • 850 µm: ≤ 5.0%

Anion Resin

• Copolymer: Styrene-divinylbenzene
• Matrix: Gel
• Type: Strong base anion
• Functional Group: Trimethylammonium
• Physical Form: White to yellow, translucent, spherical beads
• Ionic Form as Shipped: OH⁻
• Total Exchange Capacity: ≥ 1.10 eq/L (OH⁻ form)
• Water Retention Capacity: 54.0 – 60.0% (OH⁻ form)
• Ionic Conversion:
  • OH⁻: ≥ 95.0%
  • CO₃²⁻: ≤ 5.0%
  • Cl⁻: ≤ 0.5%
• Particle Size:
  • Particle Diameter: 630 ± 50 µm
  • Uniformity Coefficient: ≤ 1.20
  • < 425 µm: ≤ 0.5%

  • 1180 µm: ≤ 2.0%

Mixed Bed Properties

• Ionic Ratio: 1:1
• Shipping Weight: 710 g/L

Ultrapure Water Performance

• Resistivity at 10-min UPW Rinse: > 17.9 MΩ⋅cm (Based on 18.2-MΩ⋅cm feedwater)
• Resistivity at 10-min Salt Challenge: > 17.8 MΩ⋅cm (Based on 18.2-MΩ⋅cm feedwater)
• ΔTOC at 2h00 Rinse: ≤ 3 ppb

Suggested Operating Conditions

• Temperature Range: 15 – 25°C (59 – 77°F)
• pH Range (Stable): 0 – 14

Note: Operating at elevated temperatures (e.g., above 60 – 70°C) may impact purity and resin life.

Hydraulic Characteristics

Estimated pressure drop is available as a function of service flowrate and temperature (see Figure 1 in the original document). These expectations are valid at the start of the service run with clean water.

Quality Assurance

AmberTec™ UP6040 H/OH Ion Exchange Resin is tested for resistivity, total organic carbon (TOC), and kinetic performance to meet stringent ultrapure water (UPW) requirements.

Disclaimer

This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

---

WARNING: Oxidizing agents such as nitric acid can attack organic ion exchange resins, potentially leading to hazardous reactions. Consult knowledgeable sources before using strong oxidizing agents.

Official datasheet (PDF)

Lenntech datasheet mirror