Datasheet summary
DIAION RCP160M
PDF datasheet mirror for DIAION RCP160M (Mitsubishi). Verify with OEM before design.
Summary
Product identification
- Grade Name: DIAION™ RCP160M
- Type: Strong Acid Cation
- Matrix: Styrene-DVB, Highly Porous
- Functional Group: Sulfonic Acid
- Ionic Form: H⁺
Operating limits
- Maximum Operating Temperature: 120 ℃
- Operating pH Range: 0 - 14
Feed water
- Minimum Bed Depth: 800 mm
- Service Flow Rate: 10 - 60 m/h
Regeneration
- Regenerant: HCl, H₂SO₄
- Regenerant Concentration:
- HCl: 4 - 10 %
- H₂SO₄: 1 - 4 %
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 10 m/h
- Total Rinse Requirement: 2 - 10 BV
Product water
- Residual Acid: ≥ 5 pH
Mechanical / hydraulic
- Shipping Density: 740 g/L
- Mean Particle Size: 530 μm
- Particle Density: 1.19 g/mL
- Total Swelling (Na⁺ to H⁺): 2 %
- Whole Bead Count: 95 % min.
- Salt Splitting Capacity: 1.5 meq/mL min.
- Water Content: 45 - 55 %
- Particle Size Distribution on 710 μm: 25 % max.
- Ionic Form Conversion H Form: 97 % min.
Hydraulic Characteristics
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth of DIAION™ RCP160M resin in normal down flow operation is shown in the graphs (in the original document).
Disclaimer: This extracted data may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.