Datasheet summary
DIAION SA12ALLP
PDF datasheet mirror for DIAION SA12ALLP (Mitsubishi). Verify with OEM before design.
Summary
Product Identification
- Grade Name: DIAION™ SA12ALLP
- Type: Strong Base Anion
- Matrix: Styrene-DVB, Gel
- Functional Group: Type I (trimethyl ammonium groups)
- Ionic Form: Cl⁻
Operating Limits
- Maximum Operating Temperature: 80 °C (for Cl⁻), 60 °C (for OH⁻)
- Operating pH Range: 0 - 14
- Minimum Bed Depth: 800 mm
Feed Water / Regenerant
- Regenerant: NaOH
- Regenerant Concentration: 2 - 8 % NaOH
- Regenerant Level: 50 - 200 g/L
- Regenerant Flow Rate: 2 - 8 m/h
Operating Conditions
- Service Flow Rate: 10 - 60 m/h
- Total Rinse Requirement: 2 - 10 BV
Product Water / Resin Properties
- Whole Bead Count: 90 % min.
- Salt Splitting Capacity: 1.3 meq/mL min.
- Water Content: 48 - 55 %
- Particle Size Distribution on 1180 μm: 5 % max.
- Particle Size Distribution thr. 425 μm: 1 % max.
- Effective Size: 0.45 mm min.
- Uniformity Coefficient: 1.6 max.
- Total Swelling (Cl⁻ to OH⁻): 24 %
Mechanical / Hydraulic
- Shipping Density: 660 g/L
- Mean Particle Size: 660 μm
- Particle Density: 1.08 g/mL
The approximate pressure drop at various temperatures and flow rates for each meter of bed depth is shown in graphs within the original document.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.