SACMP

Summary

Product identification

• Product Name: SACMP
• Product Type: STRONG ACID CATION
• Polymer Matrix: Styrenic Macroporous
• Functional Group: Sulfonic Acid
• Ionic Form: Sodium

ResinTech SACMP is a tan-colored highly cross-linked macroporous strong acid cation resin in sodium form.

Physical Characteristics

• Physical Form: Spherical Beads
• Particle Size: 16 to 50 US Mesh (297 - 1190 μm)
• % < 50 mesh (300µm): < 1%
• Minimum Sphericity: 95%
• Uniformity Coefficient: 1.6
• Color: Tan

Operating Limits

• Maximum continuous temperature: 300°F (149°C)
• Operating pH range: 0 to 14 SU
• Maximum pressure loss: 25 psi

Feed Water / Chemical Properties

• Capacity (meq/mL): 1.8
• Moisture Retention: 45% to 55%
• Reversible Swelling (Na to H): 4% to 6%
• Shipping Weight: 48 - 50 lbs/ft³ (769 - 801 g/L)

Regeneration

• Regenerability: Yes
• Regenerant Concentration (Sodium form, Salt cycle): 10 to 15 percent NaCl
• Regenerant Concentration (Hydrogen cycle): 5 to 10 percent HCl or 1 to 8 percent H₂SO₄
• Regenerant level: 4 to 15 lbs./cu.ft.
• Regenerant flow rate: 0.5 to 1.5 gpm/cu.ft.
• Regenerant contact time: >20 minutes
• Displacement volume: 10 to 15 gallons/cu.ft.
• Displacement flow rate: Same as dilution water

Hydraulic Characteristics

• Backwash expansion: 25 to 50 percent
• Service flow rate: 1 to 10 gpm/cu.ft.
• Rinse flow rate: Same as service flow
• Rinse volume: 35 to 60 gallons/cu.ft.

Applications

• Softening - Industrial
• Demineralization
• Radwaste Removal
• High flow rate and high-temperature polishing applications
• Applications with a significant chlorine residual
• Applications requiring high physical strength and chemical durability

Radwaste Specifics

ResinTech SACMP is ideally suited for radwaste applications due to its high crosslinking content, offering improved resistance to chemical damage from ionizing radiation. Structural integrity is maintained up to approximately 1x10⁹ rads exposure.

Certifications

• Kosher Certified
• Halal Certified
• FDA Compliance* (*Paragraph 21CFR173.25 of the Food Additives Regulations of the US FDA)

Packaging Options

• 500 ml samples
• 1 ft³ bags
• 1 ft³ boxes
• 1 ft³ drums
• 7 ft³ drums
• 42 ft³ supersacks

Disclaimer: This extracted summary may omit figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror