SBG1 OH CP

Summary

Product identification

• Product Name: SBG1-OH-CP
• Product Type: STRONG BASE ANION, CONDENSATE POLISHING GRADE, TYPE I ANION, POLYSTYRENIC GEL, HYDROXIDE FORM
• Manufacturer: ResinTech, Inc.®
• Revision: 1.1

Typical Properties & Physical Characteristics

• Polymer Matrix: Styrenic Gel
• Ionic Form: Hydroxide
• Functional Group: Trimethylamine
• Physical Form: Spherical Beads
• Particle Size: 20 to 40 US Mesh (400 - 841 μm)
• % < 50 mesh (300µm): < 0.5%
• Minimum Sphericity: 95%
• Uniformity Coefficient: 1.2
• Reversible Swelling (OH to Cl): -18% to -25%
• Capacity (meq/mL): 1.05
• Moisture Retention: 52% to 60%
• Shipping Weight: 41 - 43 lbs/ft³ (657 - 689 g/L)
• Color: Yellow to Orange
• Regenerability: Yes

Operating Limits

• Maximum continuous temperature: 140°F (60°C)
• Maximum intermittent temperature: 180°F (80°C)
• Limited life at elevated temperature: 212 deg°F (100 deg°C)
• Operating pH range: 0 to 14 SU

Feed Water / Application Parameters

• Minimum bed depth: 24 inches
• Maximum pressure loss: 20 psi

Regeneration Parameters (Hydroxide cycle)

• Regenerant Concentration: 2 to 6 percent NaOH
• Regenerant level: 4 to 10 lbs./cu.ft.
• Regenerant flow rate: 0.25 to 1.0 gpm/cu.ft.
• Regenerant contact time: >40 minutes
• Displacement flow rate: Same as dilution water
• Displacement volume: 10 to 15 gallons/cu.ft.
• Rinse flow rate: Same as service flow
• Rinse volume: 35 to 60 gallons/cu.ft.

Maximum Impurities

• Equivalent percent Chloride (% Cl): < 1.5
• Equivalent percent Sulfate (% SO₄): < 1.5
• Equivalent percent Hydroxide (% OH): > 95
• Crush strength:
  • Average, grams per bead: > 350
  • Percent greater than 200 grams: > 95

Mechanical / Hydraulic

• Backwash expansion: 25 to 50 percent
• Service flow rate: 2 to 15 gpm/cu.ft.

Applications

• Condensate Polishing
• Anion Component in Mixed Beds

Packaging Options

• 1 ft³ bags
• 1 ft³ boxes
• 1 ft³ drums
• 7 ft³ drums
• 42 ft³ supersacks

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror