Datasheet summary
WACMP NA
PDF datasheet mirror for WACMP NA (ResinTech). Verify with OEM before design.
Summary
Product identification
- Product Name: WACMP-Na
- Product Line: ResinTech
- Type: Weak Acid Cation (WAC)
- Polymer Matrix: Acrylic Macroporous
- Ionic Form: Sodium (Na)
- Functional Group: Carboxylic Acid
- Physical Form: Spherical Beads
Typical Properties & Physical Characteristics
- Particle Size: 16 to 50 US Mesh (297 - 1190 μm)
- Percent < 50 mesh (300µm): < 1%
- Minimum Sphericity: 90%
- Uniformity Coefficient: 1.7
- Reversible Swelling (H to Na): 50% to 60%
- Temperature Limit: 180°F (82°C)
- Capacity (meq/mL): 2.5
- Moisture Retention: 43% to 60% (H form)
- Shipping Weight: 47 - 49 lbs/ft³ (753 - 785 g/L)
- Color: White to Cream
- Regenerability: Yes
Applications
- Partial Hardness Removal
- Metal Removal
- High TDS softening
ResinTech WACMP-Na is a sodium form gel weak acid cation resin intended for use in high TDS softening and for metal removal in waste treatment applications.
Packaging Options
- 1 ft³ bags
- 1 ft³ boxes
- 1 ft³ drums
- 7 ft³ drums
- 42 ft³ supersacks
Suggested Operating Conditions
- Maximum Continuous Temperature (Sodium form): 180°F
- Minimum Bed Depth: 30 inches
- Backwash Expansion: 25 to 50 percent
- Minimum Operating pH: >5 SU
- Service Flow Rate: 1 to 5 gpm/cu.ft.
Regenerant - Hydrogen Cycle
- Concentration: 1 to 5 percent HCl or 0.7 to 8 percent H₂SO₄
- Level: Approx 120% of theoretical
- Flow Rate: 0.3 to 1.5 gpm/cu.ft.
- Contact Time: >30 minutes
- Displacement Flow Rate: Same as dilution water
- Displacement Volume: 10 to 15 gallons/cu.ft.
- Rinse Flow Rate: Same as service flow
- Rinse Volume: 35 to 60 gallons/cu.ft.
Backwash Expansion Chart
- Values for expansion at various flow rates and temperatures.
Pressure Loss Chart
- Values for pressure loss per foot of resin at various flow rates and temperatures.
Capacity Charts
- Hardness Removal: Capacity versus TDS (ppm as CaCO₃) for different flow rates.
- General Capacity: Capacity versus flow rate.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.