Amberjet 1200 H

Summary

Product identification

• Product Name: AMBERJET™ 1200 H
• Description: Industrial Grade Strong Acid Cation Exchanger
• Matrix: Styrene divinylbenzene copolymer
• Functional group: Sulfonate
• Ionic form as shipped: H⁺

Performance

Operating capacity and sodium leakage are dependent on factors including water analysis, temperature, and regenerant level. Refer to engineering data sheets EDS 0355 A, 0356 A, 0359 A, and 0360 A for calculation information.

Typical Properties

• Physical form: Amber spherical beads
• Total exchange capacity [1]:
  • ≥ 1.80 eq/L (H⁺ form)
  • ≥ 2.00 eq/L (Na⁺ form)
• Moisture holding capacity [1]: 49 to 55% (H⁺ form)
• Shipping weight: 800 g/L
• Specific gravity: 1.18 to 1.22 (H⁺ form)
• Particle size:
  • Uniformity coefficient [1]: ≤ 1.2
  • Harmonic mean size: 630 ± 50 µm
  • Fines content [1]: < 0.300 mm : 0.1% max
• Maximum reversible swelling: Na⁺ ⇌ H⁺ : 10%

[1] Contractual value. Test methods are available on request.

Suggested Operating Conditions

• Maximum operating temperature: 135°C
• Minimum bed depth: 800 mm
• Service flow rate: 5 to 50 BV*/h
• Maximum service velocity: 60 m/h

Regeneration

• Regenerant: HCl | H₂SO₄
• Level (g/L): 40 to 150 | 40 to 200
• Concentration (%): 4 to 10 | 1 to 8
• Minimum contact time: 20 minutes
• Slow rinse: 2 BV at regeneration flow rate
• Fast rinse: 1 to 3 BV at service flow rate

*1 BV (Bed Volume) = 1 m³ solution per m³ resin

Hydraulic Characteristics

Bed expansion is shown as a function of backwash flow rate and water temperature (Figure 1). Pressure drop data is presented as a function of service flow rate and water temperature (Figure 2). Pressure drop data are valid at the start of the service run with clear water and a correctly classified bed.

Limits of Use

AMBERJET 1200 H resin is suitable for general industrial uses. For specific applications such as pharmaceutical, food processing, or potable water, consult Rohm and Haas for resin selection and operating conditions.

Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror