Datasheet summary
Amberjet UP6040
PDF datasheet mirror for Amberjet UP6040 (Rohm & Haas). Verify with OEM before design.
Summary
Product identification
AMBERJET™ UP6040 is a semi-conductor grade, pre-mixed, final polishing ion exchange resin bed. It is composed of strong acid cation and strong base anion gel type resins.
Description
This mixed bed resin is designed for final polishing in high purity water treatment applications, particularly in the semiconductor industry. It is intended for use in non-regenerable final polishing mixed beds and is not recommended for regenerable applications. The resin mixture is formulated to prevent clumping and minimize separation during handling in water slurries, ensuring stable performance. Its uniform particle size is designed to optimize kinetic performance, allowing high service flow rates while balancing pressure drop and purity.
Basic Resin Properties
While UPW performance is primary in non-regenerable final polishing, the component resins used in AMBERJET UP6040 are of high capacity and quality.
Typical Properties
These properties are typical and do not constitute specifications.
| Property | Cation (H⁺ form) | Anion (OH⁻ form) |
|---|---|---|
| Total exchange capacity, eq/L | ≥ 2.00 | ≥ 1.10 |
| Moisture holding capacity, % | 44.0 - 51.0 | 54.0 - 60.0 |
| Particle size | ||
| - Uniformity coefficient | ≤ 1.20 | ≤ 1.20 |
| - Harmonic mean size | 600 - 700 µm | 580 - 680 µm |
| H form, % of sites | ≥ 99 | - |
| OH form, % of sites | - | ≥ 95.0 |
| Cl form, % of sites | - | ≤ 0.5 |
| CO₃ form, % of sites | - | ≤ 5.0 |
| SO₄ form, % of sites | - | ≤ 0.1 |
Suggested Operating Conditions
These conditions are suggested for optimal performance.
- Maximum operating temperature: 60°C (140°F)
- Feed water temperature: 15 to 25°C (60 to 77°F)
- Minimum bed depth: 900 mm (3 feet)
- Service flow rate: 30 to 50 BV*/h
Recommended influent water quality
- Inlet Resistivity: > 17 MΩ.cm
- Inlet Silica: < 2 ppb
- Inlet Total Organic Carbon: < 15 ppb
*1 BV (Bed Volume) = 1 m³ solution per m³ resin
Quality Assurance
AMBERJET UP6040 resin undergoes testing by Rohm and Haas for resistivity, TOC, and kinetic performance to meet stringent UPW performance requirements. All products are manufactured in ISO 9001 certified facilities.
Disclaimer: This extraction may miss figures, footnotes, or revisions. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.