Datasheet summary
Pacific Horizon-series 12 - 60 g/h
Engineering summary from PDF text extraction for Pacific Horizon-series 12 - 60 g/h. Verify every value with the OEM datasheet.
Summary
Product identification
The product is a Horizon Series integrated ozone system. These systems are designed to combine feed gas preparation, ozone generation, mass transfer, and process control into a single, skid-based package. Applications include the beverage industry, bottled water, food processing, and industrial water treatment.
Features
- Modular Ozone Chassis Design
- Stainless Steel Frame & Ozone Generator Enclosure
- Air-Cooled Ceramic and Titanium Reactor Cell
- Over-Temperature Protection
- Optional Degas Separator
- Redundant Backflow Prevention Controls
- 4-20mA or 0-10VDC Input
- Variable Output Control
- Reactor Pressure Control
- Feed Gas Flow Control
- Remote On/Off Control
- Optional Programmable PID Controller
- Optional Dissolved Ozone Sensor
- Optional Ambient Ozone Detector with Safety Interlock
Operating limits
Ozone Mass Transfer System
- Injection Pump: Stainless steel, sized to system requirements
- Venturi: MIC natural Kynar injector
- Back Flow Prevention: Stainless steel check valve and proprietary backflow prevention system
- Mass Transfer Vessel: Fat Pipe, 50 gal., or 150 gal. standard. Larger vessels available.
- Inlet/Outlet: 1.5” stainless steel sanitary connections. Larger fittings available.
- Pump Protection: Tank level switch, interlocked
- Assembly: Stainless steel frame
Ozone Destruct System
- Catalyst: Manganese Dioxide/Copper Oxide
- Destruct Potential: Sized to application requirements
- Air Relief Valve: Stainless steel air relief vent
- Operating Temperature: 130º-140º F (54º-60º C), electronically controlled
Technical Specifications
| Model/Part Number* | Ozone Generator Model** | Max. Ozone Production (lbs/day [grams/hour]) | Performance † (at 2 ppm O₃) (gpm [lpm]) | Power Consumption (watts) | Water Inlet/Outlet (inches [mm]) | Compressed Air Inlet Fitting (inches [mm]) |
|---|---|---|---|---|---|---|
| Horizon A11/R-HA11XX | SGA11 | 0.6 (12) | 25 (95) | 2500 | 1.5” (38mm) Sanitary Fitting | 1/4” fnpt (6.35 mm) |
| Horizon A21/R-HA21XX | SGA21 | 1.0 (18) | 40 (151) | 2500 | 1.5” (38mm) Sanitary Fitting | 1/4” fnpt (6.35 mm) |
| Horizon A22/R-HA22XX | SGA22 | 1.6 (30) | 65 (246) | 2500 | 1.5” (38mm) Sanitary Fitting | 1/4” fnpt (6.35 mm) |
| Horizon A23/R-HA23XX | SGA23 | 2.4 (45) | 100 (379) | 2500 | 1.5” (38mm) Sanitary Fitting | 1/4” fnpt (6.35 mm) |
| Horizon A24/R-HA24XX | SGA24 | 3.2 (60) | 130 (492) | 2500 | 1.5” (38mm) Sanitary Fitting | 1/4” fnpt (6.35 mm) |
| Horizon C11/R-HC11XX | SGC11 | 0.5 (10) | 20 (76) | 2500 | 1.5” (38mm) Sanitary Fitting | N/A Onboard Air Compressor |
| Horizon C21/R-HC21XX | SGC21 | 0.8 (16) | 35 (132) | 2500 | 1.5” (38mm) Sanitary Fitting | N/A Onboard Air Compressor |
| Horizon C22/R-HC22XX | SGC22 | 1.3 (25) | 55 (208) | 2500 | 1.5” (38mm) Sanitary Fitting | N/A Onboard Air Compressor |
Notes:
- The value of “XX” in the part number indicates the mass transfer vessel size (Fat Pipe = 00, 50 gal. = 05, 150 gal. = 15, etc.).
- The value of “Y” indicates the number of channels dissolved ozone detection (1 or 2).
- The letter “P” indicates the PLUS option package and the letter “M” indicates the MAX option package.
- See ozone generator cut sheets for additional specifications pertaining to the generators.
- † Typical system water flow rate at 2 ppm dissolved ozone concentration. Performance as tested with municipal water at 70° F (21° C).
Operational Requirements
| Model | Compressed Air Flow (scfm [lpm]) | Compressed Air Pressure (psig [bar]) | Water Pressure (psig [bar]) | Electrical Requirement |
|---|---|---|---|---|
| Horizon A11 | 6 (170) | 30 (2.07) | 20-30 (1.4-2.1) | 230V 50/60Hz, 1 phase 30A Circuit |
| Horizon A21 | 6 (170) | 30 (2.07) | 20-30 (1.4-2.1) | 230V 50/60Hz, 1 phase 30A Circuit |
| Horizon A22 | 6 (170) | 30 (2.07) | 20-30 (1.4-2.1) | 230V 50/60Hz, 1 phase 30A Circuit |
| Horizon A23 | 12 (340) | 30 (2.07) | 20-30 (1.4-2.1) | 230V 50/60Hz, 1 phase 30A Circuit |
| Horizon A24 | 12 (340) | 30 (2.07) | 20-30 (1.4-2.1) | 230V 50/60Hz, 1 phase 30A Circuit |
| Horizon C11, C21, C22 | N/A* | N/A* | 20-30 (1.4-2.1) | 230V 50/60Hz, 1 phase 30A Circuit |
* Not Applicable - All Horizon C-Line models (C11, C21, and C22) include onboard air compression.
Mechanical / hydraulic
Dimensions
Dimension drawings are provided for models with a 50 Gallon Mass Transfer Vessel, a 150 Gallon Mass Transfer Vessel, and the Fat Pipe Mass Transfer System. Specific dimensions are listed in inches [mm] on these drawings. Drawings of other Horizon Series models are available upon request.
Disclaimer
This extraction may miss figures, footnotes, or revisions from the original PDF. Contractual data must match the OEM PDF revision used on the project.
Official datasheet (PDF)
Index context
-
Category hub: https://www.lenntech.com/products/ozone-generator.htm
-
Brand line: https://www.lenntech.com/products/pacific.htm
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.