GM 10

Summary

Product identification

The GM 10 is a submersible drainage pump.

Construction

Constructed with composite polymers, specifically developed for this product, which are rustproof, resistant to corrosion, indeformable at maximum temperature differentials, and resistant to internal and external strain.

• Shaft: Chrome steel AISI 430
• Seals: Three lip seals in NBR
• Float switch: Included for automatic start/stop

Applications

• For clean or slightly dirty water.
• Draining flooded rooms or tanks.
• Extraction of water from ponds, flowing water, or pits for collection of rainwater.
• Irrigation purposes.
• For outdoor use, the power supply cable shall have a length not less than 10 m.

Operating limits

• Maximum liquid temperature for prolonged use: 35 °C (with immersed motor)
• Immersion depth: 5 m max (with suitable cable length)
• Not suitable for continuous duty for prolonged time.

Feed water

• Clean or slightly dirty water.
• A suction strainer prevents solids bigger than 8 mm grain size from entering the pump.

Electrical

• Motor: 2-pole induction motor, 50 Hz (n ≈ 2900 rpm)
• Voltage: Single-phase 230 V ± 10%, with thermal protector
• Capacitor: Inserted in the housing incorporated in the plug (6.3 μF, 450 V)
• Cable: With plug, length 5 m, 245IEC57 4 G 0.75 mm², according to EN 60335-2-41 for pumps up to 5 kg
• Insulation class: B
• Protection: IP X8
• Winding: Triple impregnation humidity-proof dry winding

Mechanical / hydraulic

• Weight: 5 kg
• Discharge port: G 1 1/2 ISO 228 (threaded metallic insert for secure connection)
• Maximum flow rate: Up to 200 liters/min (12 m³/h)
• Maximum total head: Up to 12 m

Special features on request

• Other voltages
• Frequency 60 Hz (as per 60 Hz data sheet)
• Cable H07RN8-F, 4 G 1 mm², length 10 m, without plug
• Control box with capacitor, for pumps with cable without plug
• Without float switch
• With elbow on discharge port
• Motor suitable for operation with frequency converter

Dimensions and weights

• Weight: 5 kg
• For detailed dimensions, refer to the official PDF.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the original OEM PDF. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror