Datasheet summary
Grinder 1400-1800
PDF datasheet mirror for Grinder 1400-1800 (DAB Pumps). Verify with OEM before design.
Summary
Product identification
- Product Line: DAB pump GRINDER 1400 - 1800
- Type: Submersible pumps with cutting system (sewage pumps)
- Models & Codes:
- GRINDER 1400 M: 103010440
- GRINDER 1800 T: 103010560
General Description & Materials
- Pump Body, Motor Casing, Adjustment Ring Impeller: Cast iron
- Grinder Device: Micro casting steel
- Shaft, Handle, Filter, Bolts, Screws: Stainless steel
- Mechanical Seal: Silicon/carbide, with inspectionable oil chamber
- Motor: Continuous duty submersible induction motor in a watertight casing
- Rotor: Mounted on oversized greased sealed-for-life ball bearings
- Motor Protection: Thermal protection in the windings, to be connected to the control panel
- Power Cable: 10 metres of neoprene rubber power cable
Operating limits
- Liquid Temperature Range: from 0°C to +55°C
- Operating Range:
- From 2 to 9 m³/h
- Head up to 24.5 mt (single-phase version)
- Head up to 26.5 mt (three-phase version)
- Maximum Ambient Temperature (motor emerging): +40°C
- Maximum Immersion Depth: 10 mt
- Installation: Fixed or portable in a vertical position
Feed water
- Liquid Quality Requirements: Dirty waste water, untreated sewage containing solids and/or long fibres, always non aggressive.
Electrical
- GRINDER 1400 M
- Voltage: 1X220 - 240 V~, 50 Hz
- P1 MAX: 1.95 kW
- P2 NOMINAL: 1.1 kW (1.5 HP)
- In: 8.7 A
- Capacitor: 40 µF (450 Vc)
- GRINDER 1800 T
- Voltage: 3X400 V, 50 Hz
- P1 MAX: 2 kW
- P2 NOMINAL: 1.5 kW (2.0 HP)
- In: 3.8 A
- Capacitor: -
Mechanical / Hydraulic
- Dimensions and Weights (GRINDER 1400 M and GRINDER 1800 T are identical):
- A: 500
- B: 50
- C: 500x500 min
- D: 600 min
- E: 150
- Fø: 219
- DNM GAS: 2”
- H: 549
- H1: 109
- Q.TY X PALLET: 6
- WEIGHT: 43.2 KG
General Notes
- Pumps must be equipped with a control and protection system, supplied separately and not connected to the electropumps.
Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.