2630.180

Summary

Product identification

• Model: Flygt 2630
• Product Code: 2630.181
• Installation: Portable
• Discharge Connection: 3”/4”
• Impeller Characteristics: High head/medium head (HT/MT), Wear resistant impeller (B) with Dura-Spin™, Open (K)

Operating limits

• Liquid Temperature (Standard): max 104°F (40°C)
• Liquid Temperature (Warm Liquid Version Option): max 158°F (70°C)
• Depth of Immersion: max 65 feet (20 m)
• Liquid Density: 9.2 lb. per US gal. (1100 kg/m³)
• Strainer Hole Dimension: ø 0.39” (10.0 mm)
• pH of Pumped Liquid: pH 5–8

Electrical

• Frequency: 60 Hz
• Insulation Class: H, 360°F (180°C)
• Voltage Variation:
  • Continuously running: max ± 10%
  • Intermittent running: max ± 10%
• Voltage Imbalance (between phases): max 2%
• Number of Starts/Hour: max 30
• Cables: SUBCAB® Submersible cable
• Monitoring Equipment: Thermal contacts 284°F (140°C)
• Rating: 5.9 hp (4.4 kW) / 3-phase / 3,480 rpm
• Voltage and Current Data: The datasheet provides detailed rated and starting current values for various 3-phase voltages including 200 D, 208 D, 220 D, 220 D parallel, 220 Y parallel, 230 D, 230 Y parallel, 240 D, 240 Y parallel, 380 D, 380 Y, 380 Y parallel, 400 D, 440 D, 440 D serial, 440 Y serial, 460 D, 460 D serial, 460 Y, 460 Y serial, 480 D, 480 Y serial, 575 D, 575 Y, 600 D, and 600 Y. See the official PDF for exact tabulated values.

Mechanical / hydraulic

• Weight (excl. cable): 106 lbs. (48 Kg)
• Height: 28.5” (725 mm)
• Width: ø 11.2” (286 mm)
• Materials:
  • Outer casing: Stainless steel
  • Impeller: Hard-Iron®
  • Wear parts: Nitrile rubber/Hard-Iron®
  • Stator housing: Aluminum
  • Strainer: Stainless steel
  • Shaft: Stainless steel
  • O-rings: Nitrile rubber
  • Discharge connection: Aluminium
  • Mechanical face seals:
    • Inner Active Seal™: Aluminium oxide/Tungsten carbide
    • Outer: Tungsten carbide/Tungsten carbide
• Key Features: Air valve, Class H motor, Dura-Spin™ (unique closed impeller and suction cover), Spin-Out™ (protects outer seal), Hard-Iron™ impeller and suction cover, Sealed off terminal board, Strainer bottom with shock absorbers, Single impeller adjustment screw, Aluminium Plug-in™ seal, Inspection cover, External inspection and oil plugs.

Performance

The document includes a performance curve graph showing head (ft/m) versus flow rate (gpm/l/s) for different impeller characteristics: B 253 HT (High head), B 228 MT (Medium head), and K 236 MT (Medium head, Open impeller). See the official PDF for detailed performance curves.

Options and Accessories

• Options: Warm liquid version (max 158°F / 70°C), Quick couplings, Starters, Level regulators.
• Accessories: Tandem connections, hose connections and floating rafts. Electrical accessories such as pump controllers, control panels and monitoring relays. Low suction collars for residual pumping. Zink anodes.

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used for the project.

Official datasheet (PDF)

Lenntech datasheet mirror