BS/KS 2830

Summary

Product identification

• Model: Flygt BIBO 2830
• Product Code: 2830.180
• Installation: Portable
• Impeller Characteristics:
  • High head/medium head (HT/MT)
  • Wear resistant impeller (B) with Dura-Spin™
  • Open impeller (K)
• Rating: 5.9 hp (4.4 kW) / 3-phase / 3,480 rpm

Operating limits

• Liquid Temperature:
  • Standard: max 104°F (40°C)
  • Warm liquid version (option): max 158°F (70°C)
• Depth of Immersion: max 65 feet (20 m)
• Liquid Density: 9.2 lb. per US gal. (1100 kg/m³)
• Strainer Hole Dimension: ø 0.39” (10.0 mm)
• pH of Pumped Liquid: pH 5–8

Electrical

• Frequency: 60 Hz
• Insulation Class: H, 360°F (180°C)
• Voltage Variation:
  • Continuously running: max ± 10%
  • Intermittent running: max ± 10%
• Voltage Imbalance (between phases): max 2%
• Number of Starts per Hour: max 30
• Cables: SUBCAB® Submersible cable
• Monitoring Equipment: Thermal contacts 284°F (140°C)
• Voltage and Current Ratings: A detailed table listing Voltage (V), Rated current (A), and Starting current (A) for various configurations (D, Y, parallel, serial) is available in the official PDF. See the official PDF for exact tabulated values.

Mechanical / hydraulic

• Weight (excl. cable): 119 lbs. (54 Kg)
• Height: 30” (762 mm)
• Width: ø 14.5” (367 mm)
• Discharge Connection: 3”/4”
• Key Features:
  • Air valve
  • Class H motor
  • Dura-Spin™ (unique closed impeller and suction cover)
  • Spin-Out™ (protects outer seal)
  • Hard-Iron™ impeller and suction cover
  • Sealed off terminal board
  • Strainer bottom with shock absorbers
  • Single impeller-adjustment screw
  • Plug-in™ seal with aluminum housing
  • Inspection cover
  • External inspection and oil plugs
  • PolyLife™ coated wear parts
  • Handle with adjustable height
  • Protected cable entry
  • Wide base and low discharge
• Materials of Construction:
  • Outer casing: Aluminium
  • Impeller: Hard-Iron®
  • Wear parts: PolyLife/Nitrile rubber/Hard-Iron®
  • Stator housing: Aluminum
  • Strainer: Stainless steel
  • Shaft: Stainless steel
  • O-rings: Nitrile rubber
  • Discharge connection: Aluminium
  • Mechanical Face Seals:
    • Inner Active Seal™: Aluminium oxide/Tungsten carbide
    • Outer: Tungsten carbide/Tungsten carbide

Options and Accessories

• Options:
  • Warm liquid version (max 158°F / 70°C)
  • Quick couplings
  • Starters
  • Level regulators
• Accessories:
  • Tandem connections, hose connections
  • Electrical accessories (pump controllers, control panels, monitoring relays)
  • Zink anodes

Performance

Performance curves for High head (HT), Medium head (MT), Wear resistant impeller (B), and Open impeller (K) are provided in the official PDF, illustrating head (ft/m) versus flow rate (gpm/l/s). See the official PDF for detailed performance graphs.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data for any project must always match the specific OEM PDF revision used for that project.

Official datasheet (PDF)

Lenntech datasheet mirror