Concertor DP N150-5850

Summary

Product identification

The product is identified as a Concertor DP N150-5850. It is described as a process-controlled wastewater pumping system.

General Description

This system consists of multiple pumps as required by the customer's application, along with one gateway per pump. It is suitable for customers with specially designed process control algorithms, offering benefits such as lower capital costs, smaller control cabinets, higher pump system efficiencies, clog detection, and pump cleaning.

Operating limits

• Maximum Head (from performance curve): Approximately 16.5 m
• Maximum Flow Rate (from performance curve): Approximately 360 m³/h
• Efficiency: 80.6% (Rend.)
• Rated Speed: 500-1555 rpm
• Impeller Diameter: 212 mm
• Number of Impeller Blades: 2
• Impeller Material: Grey cast iron
• Installation Type: P - Semi Permanent, Wet
• Test Medium (for curves): Clean water

Electrical

• Motor Model: NP 6020 LT
• Phases: 3~
• Nominal Voltage: 400 V
• Nominal Power: 5.5 kW
• Rated Current: 9 A
• Starting Current: 9 A
• Frequency: 50/60 Hz
• Set Power: 5850 W
• Drive and Motor Efficiency: Data available for 1/1 Load, 3/4 Load, and 1/2 Load. See the official PDF for exact tabulated values.

Mechanical / Hydraulic

• Suction Connection Diameter: 150 mm (DN150 [6"])
• Discharge Connection Diameter: 150 mm
• Pump Weight: 125 kg (276 lbs)
• Stand Weight: 55 kg (122 lbs)
• Overall Height: 1119 mm [44 1/16"]
• Overall Width (approx.): 778 mm [30 5/8"]
• Outlet Center Line Height: 465 mm [18 5/16"]
• Guide Bars: 2"

Monitoring & Control (Gateway)

• Gateway Included: Yes
• Power Supply: 24 V DC
• Ports:
  • 1 x USB
  • 1 x RS485
  • 1 x Ethernet RJ 45
  • 1 x Display interface, CAN
• Communication Protocols:
  • Modbus RTU
  • Modbus TCP
• Standard I/O:
  • 4 x Digital outputs
  • 4 x Digital inputs
  • 1 x Analog input
  • 1 x Analog output
• Pump Interface: 1 x Pump Communication Port
• User Interface:
  • 14 x LED
  • 1 x Rotator Switch
• Data Logging: 1000 data points
• Environment Class:
  • Protection class: IP 20
  • Operation temperature: -20˚C to +70˚C
• Software Version: DP software – Variable performance control via external signal, status and alarms
• Approvals: CE, UL, CSA
• Interface (HMI): None

---

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. For contractual data and complete specifications, always refer to the specific OEM PDF revision used on your project.

Official datasheet (PDF)

Lenntech datasheet mirror