HS 5100.211

Summary

Product identification

• Model: HS-5100.211 Submersible Pump
• Application: Abrasion Resistant Slurry Pump, ideal for pumping abrasive slurries, providing high wear resistance and utmost dependability.
• Approvals:
  • CSA approved to UL Standard #778
  • Explosion-proof FM approved

Operating limits

• Motor Starts: Allows at least 15 starts per hour.
• Motor Insulation: Class H (180°C)

Electrical

• Cable: Standard 50 ft. of SubCab cable. Other lengths available.
• Motor:
  • Air filled, NEMA design B
  • 4 pole or 6 pole
  • Built-in thermal sensors for additional motor overload protection.

Mechanical / hydraulic

• Pump Housing: High strength, cast iron ASTM A48 Class 35B body.
• Volute/Stand: High-chrome cast iron ASTM 532 Alloy IIIA.
• Static Seals: Leakproof Nitrile rubber O-rings in precision machined grooves, with controlled compression.
• Shaft: Stainless steel AISI 431.
• Motor Mounting: Shrink-fit to the motor housing.
• Bearings:
  • Upper: double row angular contact ball bearing.
  • Lower: double row angular contact ball bearing.
• Shaft Seals:
  • Special design, including an expeller which protects the seal from direct particle intrusion from the hydraulic end.
  • Independent double face seals running in environmentally friendly, FDA approved (Standard #172.878) lubricant.
  • Upper seal: tungsten carbide/tungsten carbide.
  • Lower seal: tungsten carbide/tungsten carbide.
  • Float type leakage sensor included.
• Impeller: Three vane, Non-clog, closed type impellers. Material: high-chrome cast iron AISI 532 Alloy IIIA.
• Strainer: Painted steel ASTM A 36/A 572 Grade 50, A 618 Grade ll.
• Agitator: High-chrome cast iron ASTM 532 Alloy IIIA.
• Fasteners: Stainless steel AISI 316L.
• Junction Chamber: Cable entry incorporates a strain relief and grommet controlled compression sealing.
• Options: Strainer, Agitator, Stand, Integral closed loop cooling system, Victaulic flange and coupling.
• Controls: Manual and automatic controls available upon request.

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the official OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror