HS 5100.300

Summary

Product identification

• Model: HS-5100.300
• Type: Submersible Pump, Abrasion Resistant Slurry Pump
• Description: Ideal for pumping abrasive slurries, providing high wear resistance and utmost dependability.

Operating limits

• Motor Insulation: Class H (180°C)
• Motor Starts: Allows at least 15 starts per hour

Electrical

• Motor: Air filled, NEMA design B, 4 pole or 6 pole. Shrink-fit to the motor housing. Built-in thermal sensors for additional motor overload protection.
• Cable: Standard 50 ft. of SubCab cable. Other lengths available.
• Leakage Sensor: Float type leakage sensor included with shaft seals.

Mechanical / hydraulic

• Pump Housing: High strength, cast iron ASTM A48 Class 35B body.
• Volute/Stand: High-chrome cast iron ASTM 532 Alloy IIIA.
• Static Seals: Leakproof Nitrile rubber O-rings in precision machined grooves, with controlled compression.
• Shaft: Stainless steel AISI 431.
• Bearings:
  • Upper: double row angular contact ball bearing.
  • Lower: double row angular contact bearing.
• Shaft Seals:
  • Special design, including an expeller which protects the seal from direct particle intrusion from the hydraulic end.
  • Independent double face seals running in environmentally friendly, FDA approved (Standard #172.878) lubricant.
  • Upper seal: tungsten carbide/tungsten carbide.
  • Lower seal: tungsten carbide/tungsten carbide.
• Impeller: Three vane, Non-clog, closed type impellers. Material: high-chrome cast iron AISI 532 Alloy IIIA.
• Strainer: Painted steel ASTM A 36/A 572 Grade 50, A 618 Grade ll.
• Agitator: High-chrome cast iron ASTM 532 Alloy IIIA.
• Fasteners: Stainless steel AISI 316L.
• Junction Chamber: Cable entry incorporates a strain relief and grommet controlled compression sealing.

Approvals

• CSA approved to UL Standard #778
• Explosion-proof FM approved

Options

• Integral closed loop cooling system
• Strainer
• Agitator
• Stand
• Victaulic flange and coupling
• Controls: Manual and automatic controls available upon request.

Disclaimer: This summary is based on the provided text extract. It may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror