HS 5150.300

Summary

Product identification

• Model: HS-5150.300 Submersible Pump
• Description: Ideal for pumping abrasive slurries, providing high wear resistance and utmost dependability.
• Application: Abrasion Resistant Slurry Pump

Operating limits

• Motor insulation class: H (180°C)
• Motor starts: At least 15 starts per hour

Mechanical / hydraulic

• Cable: Standard 50 ft. of SubCab cable. Other lengths available.
• Junction Chamber: Cable entry incorporates a strain relief and grommet controlled compression sealing.
• Pump Housing: High strength, cast iron ASTM A48 Class 35B body.
• Volute/Stand design: High-chrome cast iron ASTM 532 Alloy IIA.
• Static seals: Leakproof Nitrile rubber O-rings in precision machined grooves, with controlled compression.
• Shaft: Stainless steel AISI 431.
• Motor: Air filled, NEMA design B. Shrink-fit to the motor housing.
• Bearings:
  • Upper: double row angular contact ball bearing.
  • Lower: double row angular contact bearing.
• Shaft Seals: Special design, including an expeller which protects the seal from direct particle intrusion from the hydraulic end. Independent double face seals running in environmentally friendly, FDA approved (Standard #172.878) lubricant.
  • Upper seal: tungsten carbide/tungsten carbide.
  • Lower seal: tungsten carbide/tungsten carbide.
• Impeller: Three vane, Non-clog, closed type impellers. Material: high-chrome cast iron AISI 532 Alloy IIA.
• Strainer: Painted steel ASTM A 36/A 572 Grade 50, A 618 Grade ll.
• Agitator: High-chrome cast iron ASTM 532 Alloy IIA.
• Fasteners: Stainless steel AISI 316L.

Electrical

• Motor: NEMA design B, 4 pole or 6 pole.
• Insulation: Class H (180°C).
• Protection: Built-in thermal sensors for additional motor overload protection.
• Sensors: Float type leakage sensor included.

Approvals

• CSA approved to UL Standard #778
• Explosion-proof FM approved

Options

• Integral closed loop cooling system
• Strainer
• Agitator
• Stand
• Victaulic flange and coupling
• Controls (Manual and automatic controls available upon request)

Disclaimer: This summary is based on extracted text and may not include all figures, footnotes, or the latest revisions from the complete OEM PDF datasheet. Contractual data must always match the specific OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror