Goulds HT 3196 i-FRAME High-Temperature Process Pumps

Summary

Product identification

• Goulds HT 3196 High-Temperature Process Pumps with Patented Intelligent Monitoring.
• Part of the Goulds 3196 ANSI pump family.
• Available in multiple configurations:
  • HT 3196: 5 pump sizes
  • HT 3196 /: 15 pump sizes
  • HT 3196 LF: 3 low flow pump sizes

Operating limits

• Capacities: to 4,500 gpm (1,023 m³/hr.)
• Heads: to 925 ft (282m)
• Temperatures: up to 700°F (372°C)
• Pressures: up to 450 Psig (3,102 kPa)
• Maximum Liquid Temperature (Oil/Grease Lubrication without Cooling): 350° F (177° C)
• Maximum Liquid Temperature (Oil Lubrication with High Temp. Option): 700°F (370° C)

Applications

• Hot Water
• Pilot Plants
• Thermal Oils/Heat Transfer Fluids
• Electronic Heating and Cooling
• Reactor Heating
• Die/Mold Pre-heating Systems
• Urea
• High Temperature Oils and Heat Transfer Fluids (synthetic, natural)
• High Temperature Chemical Processing (hot, aggressive solvents, acids, chlorides, asphalt, tars, Naphtha, Naphthalene, aromatics, hydrocarbons, urethanes, epoxies, paints, zinc compounds, magnesium compounds, adhesives, plastisizers, polyols, polymers, monomers, resins, oxide slurries, pigments, dyes, inks)

Markets

• Chemical/Petrochemical
• Food & Beverage
• Pharmaceutical
• Rubber & Plastic Manufacturing
• Pulp & Paper
• Power/Utility

Mechanical / hydraulic

• Design Features:
  • Centerline-mounted casing for bi-directional thermal expansion control, minimizing shaft misalignment and pipe strain.
  • ANSI Class 300 RF flanges for positive sealing.
  • Graphite casing gasket and impeller O-ring for high-temperature sealing.
  • High temperature bolting.
  • Stainless steel shaft.
  • Finned tube oil cooler for supplemental oil sump cooling.
  • Back-pull out design for simplified maintenance.
  • Rigid shaft designed for minimum deflection at seal faces (less than 0.002 in. / 0.05 mm).
  • Bearings sized for 10-year average life.
  • Optimized oil sump design with increased oil capacity (10%-20% larger than ANSI pump average) and contoured design.
  • One-inch Bulls Eye Sight Glass for oil level and condition inspection.
  • Magnetic drain plug.
  • Ductile Iron Frame Adapter.
  • High-strength A193 B7 steel bolts and studs.
  • Top centerline discharge for optimum air handling and self-venting.
  • Fully open impeller design.
  • Heavy-duty steel casing support.
  • Low-thermal conductivity 316SS shaft.
  • Rigid Frame Foot reduces effects of pipe loads on shaft alignment.
• Materials of Construction:
  • Overall: Carbon Steel, Duplex SS (CD4MCu), Ductile Iron, Alloy 20, 316SS Stainless Steel, Hastelloy C.
  • Casing: CS, 316SS, CD4MCu, Alloy 20, Hastelloy C.
  • Impeller: Ductile Iron, 316SS, CD4MCu, Alloy 20, Hastelloy C.
  • Shaft (Less Sleeve): 316SS, Alloy 20, Hastelloy C.
  • Shaft (With Sleeve): 316SS.
  • Shaft Sleeve: 316SS, Alloy 20, Hastelloy C.
  • Stuffing Box Packing: Graphite.
  • Frame Adapter: Ductile Iron.
  • Thrust Bearing: Double Row Angular Contact.
  • Radial Bearing: Single Row Deep Groove.
  • Stuffing Box Cover (Packed Box) / Seal Chamber (Mechanical Seal): 316SS, CD4MCu, Alloy 20, Hastelloy C.
  • Bearing Frame: Cast Iron (Ductile Iron for STi Group).
  • Casing Support: Fabricated Steel.
  • Gland: 316SS, CD4MCu, Alloy 20, Hastelloy C.
  • Stud/Nut, Cover-to-Adapter: 304SS.
  • Oil Sight Glass: Glass/Steel.
  • INPRO® Labyrinth Oil Seal (Outboard/Inboard): Stainless Steel/Bronze.
  • Casing Gasket: Graphite.
  • Casing Drain Plug (Optional): 316SS, CD4MCu, Alloy 20, Hastelloy C.
  • Gasket, Frame-to-Adapter: Buna.
  • Gasket, Bearing End Cover: Cellulose Fiber with Binder.
  • Cap Screw, Adapter-to-Casing: 304SS.
  • O-ring, Impeller: Graphite.
  • Jacking Bolt: 304SS.
  • Backplate (Dynamic Seal Option): 316SS, CD4MCu, Alloy 20, Hastelloy C.
  • Dowel Pin, Frame-to-Adapter: Steel.
  • O-ring, Bearing Housing: Buna Rubber.
  • Bearing Frame Finned Cooler: Steel /Copper.
  • Condition Monitor: Stainless Steel/Epoxy.
• Dimensions & Compliance:
  • ANSI B73.1M and PIP RESP 73H-97 dimensional compliance.
  • Casing Corrosion Allowance: 0.125 inches (3 mm).
  • For specific pump size dimensions (Discharge, Suction, X, A, B, D, SP, Weight), refer to the official PDF.
• Power Limits (per 100 RPM):
  • 1.1 HP (0.82 kW)
  • 3.4 HP (2.6 kW)
  • 5.6 HP (4.2 kW)
  • 14 HP (10.5 kW)
  • For 17 inch sizes: 20 HP (15 kW)
• Shaft Sealing Systems:
  • Standard configuration includes graphite packing rings in a standard bore box.
  • Comprehensive range of seal chambers: Standard Bore, Big Bore™, and Goulds patented TaperBore Plus™ with VPE rings.
  • Jacketed seal chambers available for temperature control.
  • Single and dual cartridge mechanical seals available for moderate and high temperature applications.
  • All ANSI B73.1 seal flush and cooling plans are available (e.g., CPI PLAN 7311, CPI PLAN 7353).
• Interchangeability:
  • Completely interchangeable with Goulds model 3196 (all internal components common except casing).
  • Power end provides common inventory for models 3196, CV 3196, HT 3196, LF 3196, NM 3196, 3198, and 3796.
• Baseplate Options:
  • CAMBER TOP CAST IRON
  • FABRICATED STEEL
  • ENHANCED FEATURE FABRICATED STEEL
  • ADVANTAGE (Heavy duty PIP compliant fabricated steel)
  • POLYSHIELD (Heavy duty polymer concrete combination baseplate and foundation)
  • CHEMBASE PLUS™ (Polymer concrete construction)
• Warranty:
  • 5-year standard warranty on pumps.
  • 3-year warranty on Power End.

Monitoring and Control

• Patented Condition Monitor: Continuously measures vibration and temperature at the thrust bearing, with colored LEDs indicating pump health and early warning of improper operation.
• ProSmart®: Continuous machinery monitoring using wireless technology and advanced signal processing to identify issues, with automatic notification and web-hosted accessibility.
• PumpSmart®: Variable speed drive with pump-specific algorithms for optimized pump control and protection, reduced energy consumption, increased uptime, and decreased maintenance cost. Features sensorless pump protection and sensorless flow function (within ± 5% of rated flow).

---

Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or revisions present in the full OEM PDF. Contractual data must match the OEM PDF revision used on the project.

Official datasheet (PDF)

Lenntech datasheet mirror