Datasheet summary
Speck NP25 60 140 70 140 L
PDF datasheet mirror for Speck NP25 60 140 70 140 L (Speck Pumps). Verify with OEM before design.
Summary
Product identification
High-Pressure Plunger Pump, Series NP25.
| Type | Code No. |
|---|---|
| NP25/60-140 | 00.6580 |
| NP25/70-140 | 00.6158 |
Operating limits
Data are for intermittent operation. Data for continuous operation are available on request.
- Pressure max: 140 bar
- RPM max: 1450 min⁻¹
- Water Temp max: 70 °C
- NPSH Required: 10.0 mWs
A safety valve must be installed to ensure the admissible operating pressure is not exceeded by more than 10%. Exceeding temperature or speed limits voids the warranty.
Feed water
SPECK TRIPLEX Plunger Pumps are suitable for pumping clean water and other non-aggressive or non-abrasive media with a specific weight similar to water.
Prior to pumping any other media, suitability and resistance of standard and/or special-version pumps must be checked, considering pump performance and temperature values.
Particular care must be taken when pumping warm water, ensuring cavitation cannot occur.
Product water
| Type | Output max |
|---|---|
| NP25/60-140 | 59.5 l/min |
| NP25/70-140 | 69.7 l/min |
Electrical
| Type | Power Consump. |
|---|---|
| NP25/60-140 | 16.3 kW |
| NP25/70-140 | 19.2 kW |
A general formula for calculating power is: P (bar) x Q (l/min) = kW / 475
Mechanical / hydraulic
| Type | Plunger dia. | Stroke | Weight approx. |
|---|---|---|---|
| NP25/60-140 | 30 mm | 20 mm | 18.0 kg |
| NP25/70-140 | 30 mm | 24 mm | 18.0 kg |
Construction Characteristics:
- Crankcase of solid aluminium-cast.
- Crankshaft with taper roller bearings together with plain bearing conrod all run in oil.
- Solid ceramic plunger.
- Double plunger sealing with Leakage-return.
- All gaskets in seal sleeves ensuring precise centring and easy replacement.
- Identical suction and discharge valves, discharge valves easily accessible.
Materials Used:
- Valve Casing: Special Brass.
- Plunger: Solid ceramic.
- Valves: High-Grade Stainless Steel.
- Sleeves: Nitrile with fabric reinforcing.
- Crankshaft: Drop-forged and case-hardened.
Installation Notes: Even though SPECK-TRIPLEX pumps run almost pulsation-free, a pressure accumulator may be necessary depending on the unit's construction and operating conditions. The same effect can also be achieved by using flexible pressure lines. Cavitation must be avoided.
Disclaimer: This summary is based on extracted text and may miss figures, footnotes, or recent revisions from the original PDF. Contractual data must always match the OEM PDF revision used on the project.
Official datasheet (PDF)
Curated from selected public technical reference material for discovery and preliminary comparison. This summary is not a substitute for a current certified manufacturer datasheet. Verify revisions and design limits before use.